Adopt automatic mechanical pressurization and heating technology, mold sleeve specification is 30mm, Heating power 650W, automatic pressing and shutdown pressure relief, real-time temperature display, support room temperature sampling, suitable for thermoset material inlay.
Processing capacity range of 100~ 5000ml, maximum processing viscosity of 5000CP, suitable for a variety of Disperser models, providing stable Sample Handling ability.
Adopt automatic mechanical pressurization and curing inlay program, Heating power 650W, mold sleeve specification is 40mm, realize automatic heating and pressurization and automatic pressure relief after molding, real-time temperature display to ensure stability and reliability.
Processing capacity 100-6000ml, maximum processing viscosity 8000CP, suitable for a variety of models of Disperser, cutter head design to optimize the dispersion effect, adapt to different capacities and viscosity Sample Handling needs.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
The specimen is fixed with a bilateral fixture structure, with a maximum cutting section of 100 × 120mm, a transparent observation window and a powerful exhaust device. After cutting, the surface of the specimen is bright and flat without burns.
Heating power is 440W, the temperature is precisely controlled by digital temperature controller, easy to operate, suitable for thermosetting material inlay, and improve the preparation efficiency of the sample.
Adopt stainless steel shell and grinding wheel bushing, durable; equipped with circulating chilled down water Tank, the surface of the sample after cutting is bright and flat without burns; the maximum cutting section is 65 * 65mm, and the spindle Rotation speed is 1400rpm.
The equipment is equipped with a wide range of 0-3000rpm variable frequency speed regulation, which can be flexibly adapted to different sample needs. It is made of 304 stainless steel dispersion plate, which is corrosion-resistant and easy to clean. The silent design reduces working noise and can handle up to 25 liters.
Standard Processing capacity 500-10000ml, suitable for HR series Disperser, suitable for efficient dispersion processing of large-volume samples.
Hand-crank mechanical pressurization is easy to operate, digital temperature controller to ensure stable temperature, Heating power 440W, mold sleeve specification < 25mm, suitable for thermosetting material inlay, protect the edge of the sample.
Driven by a servo brushless motor, with a power of 550W and a speed range of 0 to 6500rpm, it supports 24-hour continuous operation. The dispersion disc can be disassembled and replaced to ensure stable and efficient operation and flexible adaptation to different sample requirements.
Using 2800rpm Rotation speed and 2.2kW Power, equipped with fast fixture and chill down system, can cut 50mm cut sample, easy operation and maintenance.
The precision blade combination ensures that the edge of the specimen is flat, and 152 * 12.7mm annular compression specimens and (200~ 250) * 15mm tensile specimens can be cut, meeting TAPPI-T409 and JIS-P8113 standards.
The stepless speed range is 0-4000 rpm, the lifting stroke is 32 cm, and the working height can be flexibly adjusted. Equipped with 304 stainless steel dispersion disc, it is corrosion-resistant and easy to clean, and supports continuous and stable operation.
