The guide rail type is easy to operate, the positioning pin ensures accuracy, the pressing device reduces errors, the sampling thickness is less than 1.0mm, the parallelism is less than 0.1mm, and a variety of standard samples can be cut.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
The maximum load is 5KN, and the precision structure design is adopted to ensure stable clamping during testing. It is suitable for a variety of material testing requirements, and is easy to operate and durable.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Conductivity Detector measurement principle, measurement range 0-80%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation and backlight display, easy to quickly detect on site.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
Using the 4-pin scribing needle specification R0.25/0.5/1.0/1 mm, by moving at a constant speed on the coating, the trajectory change from width to narrower to depth to shallower can be measured.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
Double disk independent control supports different processes synchronized, brushless DC motor provides 100~ 1000rpm stepless speed regulation, precision cast iron chassis to ensure equilibrate stability, magnetic disc and Teflon treatment to avoid residue, automatic chill down system to extend equipment life.
Ruby Probe wear-resistant, measurement range 0~ 5000μm, error +/- 2~ 3%, built-in LED light, IP65 Protection Rating, chemical resistant material, suitable for chemical cleaning.
Fiber wear-resistant pen design, Test accuracy of +/- 0.5 dyne, 15ML large capacity can be tested multiple times, 2-4 seconds to quickly obtain results, suitable for a variety of materials Surface Energy testing.
Using fiber wear-resistant pen tip, size 138mm long, 15ml large capacity, Accuracy up to +/- 0.5 dyne, can test a variety of materials Surface Energy value and cleanliness, easy and fast operation.
Made of wear-resistant and corrosion-resistant alloy steel, with a Hardness of 52 +/- 2HRC, it has upper and lower working surfaces to improve work efficiency and tool life.
