The circular stainless steel liner is used to prevent condensation and dripping, the copper tube bell mouth is designed with good air tightness and low water consumption, and the special high temperature foaming material improves the pressure life. It is equipped with a 16L large-capacity water Tank and an automatic water replenishment system.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
The transparent vacuum chamber is sturdy and durable, and the automatic constant pressure air supply ensures the stability of the preset Vacuum Level. The range of Vacuum Level is 0~ -90KPa, and the test process is automatically completed with one-click operation, without the need for an external vacuum pump.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
Imported 100,000-hour long-life Illuminant and narrowband filter system, Optical inspection stability, measurement range 0-400NTU, resolution up to 0.01NTU, support 10 standard Linear dispersion storage.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Using negative pressure test principle, Vacuum Level range -90~ 0kPa, vacuum accuracy 2.5; no power supply, compressed air drive, equipped with ultra-thick Organic Glass vacuum Chamber for easy observation of bubbles.
Adopt Touchscreen control, automatic constant pressure air supply, Ultimate vacuum degree -95KPa, equipped with transparent organic Glass vacuum chamber, built-in vacuum pump with low noise, one-click operation to automatically complete the test.
Adopting pneumatic working mode, the test rate can be adjusted from 5 to 60 times per minute, with 4 independent test stations, capable of simultaneously testing switches and plugs and sockets, and supports current on-off and mechanical counting methods.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
Equipped with a gas ballast valve to prevent the pump oil from mixing and prolong the service life, with an automatic anti-return oil check valve, the pumping rate is 6L/s, the ultimate pressure is up to 1Pa, and a variety of interface conversions are supported.
Adopt 24-bit High Accuracy AD converter and stable pressure sensor, Measurement range 50~ 1400kPa, with full scale alarm and 3-speed limit protection function, support a variety of Unit switches and thermal printouts.
Test speed 0-300 times/minute, strike force 0-500gf adjustable, automatically detect key damage and stop within 8 seconds, support multi-pRoduct testing.
Using electromagnetic motor and diaphragm sealing Chamber, maximum Vacuum Level 0.08Mpa, full Teflon material resistant to strong chemical corrosion, free of daily maintenance and long service life.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
