With 60V DC voltage and 25A current output to meet the needs of large area samples; equipped with electrolysis liquid circulation and chill down device to ensure polishing conformity and Stability.
Using magnetic Induction and eddy Current dual principle, it can simultaneously measure paints and zinc layer thickness. Measurement range is 0-1500 μm, accuracy is +/- 1%, suitable for composite coating system inspection.
Using pre-pressure technology to ensure stable exudation of electrolysis in viscous samples, equipped with Protelyte oily electrolysis solution to avoid protein reaction, membrane Impedance < 500MΩ, Temperature range 0~ 130 ℃, suitable for high temperature and high voltage environment.
Using magnetic Induction and eddy Current principle simultaneous measurement composite coatings, Measurement range 0~ 1500μm, error +/- 1%, can display a single coating and zinc layer thickness, suitable for the accurate detection of ferrous and non-ferrous substrates.
Pre-pressurization technology is used to ensure stable exudation of electrolysis solution in viscous samples, equipped with 3 ceramic core liquid network parts and Protelyte oily electrolysis solution, membrane Impedance < 200MΩ, effectively prevent protein settling blockage, suitable for high temperature and high voltage environment.
Pre-pressurization technology is used to prevent clogging of viscous samples, Protelyte oily electrolysis solution avoids protein reaction, ceramic core liquid network design, Temperature range -5~ 100 ℃, Membrane Impedance < 150MΩ.
Pre-pressurization technology is used to prevent clogging of viscous samples, Protelyte oily electrolysis solution avoids protein reaction, three ceramic core liquid network design, Temperature range 0~ 130 ℃, Membrane Impedance < 200MΩ.
Using imported cold light source and narrow-band interference technology, the detection limit is 0.05mg/L, supports continuous measurement and standard Measurement mode, and the built-in large-capacity lithium battery can store 4000 sets of data.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Imported long-life Illuminant and narrowband filter system, Optical inspection stability is less than 0.002A/20min, measurement range 0.2~ 5.00mg/L, support long-term data storage and user self-calibration Linear dispersion.
Using eddy Current thickness measurement principle, Measurement range 0-1000μm, resolution 0.1μm, minimum measurable convex curvature 3mm, with automatic shutdown and low voltage prompt function.
Operating temperature range 0-70 ° C, temperature sensor, multi-pin connector support, maximum pressure 0.2 bar.
Adopt magnetic Induction principle measurement Coating thickness, Measurement range 0-1250μm, resolution up to 0.1μm, with automatic identification Probe, Data storage and upper and lower limit alarm function, aluminum shell is sturdy and durable.
Pre-pressurization technology is used to ensure stable exudation of electrolysis in viscous samples, equipped with a three-ceramic core liquid network structure to reduce the risk of clogging, Protelyte oily electrolysis solution avoids reaction with proteins, membrane Impedance is less than 200MΩ, suitable for -5~ 100 ℃ Temperature range.
Measurement range 200-600ppm, accuracy +/- 6% reading, LED Illuminant 610nm, automatic shutdown function, suitable for seawater calcium Ion concentration detection.
