Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column, intelligent microcomputer control to achieve automatic operation and online water quality monitoring, effective removal of trace ions.
Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column are used to remove trace ions efficiently, and intelligent microcomputer control realizes automatic operation and online water quality monitoring.
The water pRoduction rate reaches 10L/h, the water intake Flow velocity is 1.0L/min, and the RO membrane intelligent anti-scale washing and automatic domestic circulation system are used to ensure stable water quality and meet the high standard requirements of the laboratory.
The water pRoduction rate reaches 5L/h, the water intake Flow velocity is 0.8L/min, and the RO membrane intelligent anti-scale flushing and automatic domestic circulation system are supported to ensure the stability of ultrapure water quality, which is suitable for a variety of experimental needs.
The resistivity of the pRoduced water is greater than 18.2MΩ · cm, the water pRoduction capacity is up to 100L/H, and it is equipped with a 5.1-inch LCD screen to display water quality and temperature in real time. It supports automatic circulation and disinfection functions, effectively prolonging the life of consumables.
The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.
The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.
Using U-Tube Reverse Flow BS/IP/RF design, the viscosity measurement range is 60000-300000cSt, which is based on the principle that the flow time of the liquid in capillary tubing is proportional to the viscosity to ensure accurate measurement.
High-power brushless DC motor provides 130mN · m torque, supports a wide range of speed regulation from 50 to 1500rpm, with forward and reverse Stir and bi-directional Stir modes, adjustable commutation time, and temperature control accuracy of +/- 0.5 ℃.
Four-ring Conductivity Detector Probe with three Measurement ranges (0.0 to 199.9 mg/L, 0 to 1999 mg/L, 0.00 to 19.99 mg/L), manual temperature compensation and single point calibrating ensure easy operation and accurate measurement in different environments.
Filtrate efficiency ≥ 99.97% for ≥ 0.5μm particles, wind speed 1.2~ 2m/s adjustable, trend thousand cleanliness, with moving runner and adjustable jack, flexible to adapt to different working position needs.
Filtrate efficiency ≥ 99.97% For particles ≥ 0.5μm, the average wind speed is adjustable from 1.2 to 2m/s, the trend purification level is up to 1000, the work surface can reach 10,000, equipped with mobile runner and adjustable jack, flexible to adapt to changing working positions.
The double outlet design can pRoduce UP water and RO water at the same time, the water pRoduction capacity is 10L/H, the resistivity of UP water is > 10MΩ · cm@25 ℃, and the fully enclosed pipeline design and automatic timing flushing function are adopted to ensure the stability of water quality.
The double water outlet design can provide both UP and RO water simultaneously, with a water pRoduction capacity of 20L/H, a fully enclosed pipeline to maintain stable water quality, automatic timing flushing and water shortage protection functions, and quiet operation with noise below 40 decibels.
7-Inch color touch screen control, three-way water quality online monitoring of incoming water, RO water, and UP water, with a water pRoduction capacity of 60L/H, an effluent resistivity greater than 18.25MΩ · cm, and support for quantitative water intake and one-click disinfection.
