The instrument employs the principle of heavy hammer impact, with a drop height adjustable within the range of 1000 ± 5 mm and a hammer mass of 500 ± 1 grams, designed for the precise determination of a material's puncture resistance.
Impact height 0-100cm adjustable, Graduation 1cm; equipped with a variety of hammer mass such as 1000g and punch diaMeter such as Φ 12.7mm, support accurate deformation testing, suitable for coating impact resistance evaluation.
With Vacuum chuck function, drop height 300~ 2000mm adjustable, support 0 °, 45 °, 90 ° multi-angle drop, with Acceleration and speed measurement, can accurately control the impact site.
Single arm double column structure equipped with hydraulic buffer device, drop height 400-1500mm adjustable and accuracy of +/- 10mm, support face angle full angle drop test and have electric reset function, maximum load weight 100kg to ensure test Stability.
Adopting a single-arm double-column structure, equipped with a hydraulic buffer device to improve service life and stability, with a drop height range of 400 to 1500mm, it can test up to 80kg specimens, meeting a variety of standard testing requirements.
Adopting double column guide and hydraulic buffer system, the drop height range can be set from 0 to 2000mm, the maximum load is 300kg, and it supports all-round drop testing of edge angles and has upper and lower induction protection devices.
Impact height 40cm, drop weight mass 500g, the degree of damage to the paint film is assessed by steel ball Impact, and the digital grade shows the anti-Impact ability, which is suitable for standard testing.
The equipment is designed with double rollers, with a test load of 5kg, a drop height of 500 + 1000mm, and a rotation speed of 5-20 times/minute to meet the needs of continuous rotary drop testing.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
Impact height 0~ 50cm adjustable, drop weight mass 1000g, the structure is simple and easy to operate, punch diaMeter 8mm and die base aperture 15mm cooperate to prevent the edge of the test plate shear.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
It can simultaneously test two devices, with a maximum load of 2kg and a drop height of 60 to 150mm. It uses pneumatic components and PLC control to achieve high-speed consistent testing, and has automatic stop and count functions.
Can test 300~ 1500mm drop height, bearing 100kg load, double wing structure to ensure that the drop plane error is less than 1 °, suitable for all kinds of Encasement box testing.
Automatically detect the drop point and softening point of amorphous polymer compounds, temperature resolution 0.1 ℃, heating rate adjustable eight gears, in line with ASTMD3461-97 standard, easy to operate and strong sense of cleanliness.
The single-arm double-column structure is equipped with a hydraulic buffer device, with a drop height error of no more than +/- 10mm and an angle error of less than 5 °. It supports seven-speed height adjustment and face corner drop mode, with a maximum load of 65kg and an electric lifting function.
