360 ° tumbling grinding structure, combined with the characteristics of vertical and horizontal Ball milling, maximum Processing capacity 6000ml, minimum discharge particle size 0.1μm, support dry grinding, wet grinding and other grinding methods, easy operation and power-off protection function.
The use of national standard 06Cr19Ni10 stainless steel precision machining, high temperature resistance up to 300 ℃, low temperature resistance to -100 ℃, hardness ≤ 187HB, with acid and alkali resistance, grinding anti-sinking, anti-stick, suitable for dry grinding and wet grinding.
It adopts copper ring and steel ball structure, supports 2-3.55 gram steel ball configuration, and accurately determines the softening temperature of the material through the drop distance of 25.4 mm, which is suitable for all kinds of asphalt experiment needs.
The total weight of steel ball load is 135 +/- 5g, and the test displacement is 30 +/- 1 °, which can automatically detect water permeability and stop counting, and support the simultaneous testing of 1 to 4 test pieces.
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
Impact performance of the reflective film can be accurately measured by using the principle of free fall of steel ball, steel ball mass 450 +/- 3g, drop 250mm, reasonable structure and simple operation, safe and reliable measurement.
Rotation speed of the ball mill can reach 1100rpm, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
The 360 ° tumbling structure combined with the overall movement of the planetary disc and the ball mill can achieve stronger friction and impact energy; the maximum Processing capacity is 4000ml, and the minimum discharge particle size can reach 0.1μm. It supports dry grinding, wet grinding and other grinding methods to improve sample uniformity and efficiency.
360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 16L, support dry and wet grinding vacuum grinding, can reach 0.1 μm discharge particle size, with a variety of ball mill Tank material and grinding mode selection.
360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 10L, minimum discharge particle size 0.1μm, support dry grinding wet grinding and other methods, can be equipped with a variety of materials ball mill Tank, easy to operate and with power protection function.
Processing capacity up to 100L, minimum discharge particle size 0.1μm, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball milling Tank to meet different material needs.
The total grinding volume is 100L, and the maximum can be configured with 4 25L ball milling cans; with dry grinding, wet grinding, vacuum grinding and other grinding methods; using the principle of planetary motion, grinding ball high-speed collision friction material; the core components choose high-quality inverters and motors, stable and durable performance.
With 8L Processing capacity and 0.1μm discharge particle size, four-station design and 580rpm Rotation speed, support dry grinding, wet grinding and vacuum grinding, equipped with 600CFM cooling system and a variety of ball milling Tank material selection.
Adopt three-axis linkage system, the maximum machining error is only 0.05mm, support a variety of sample shape processing, such as bar, dumbbell and irregular graphics, spindle Rotation speed 24000rpm.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
