Measurement range 0~ 300μm, resolution up to 0.01μm, support multi-layer nickel potential difference analysis, test size optional Φ 2.4mm to Φ 0.8mm.
The large sink design is used to reduce buoyancy errors, and Brazilian fire gold with coating thickness > 30μm can be tested with a density accuracy of 0.0001g/cm ³, which supports the analysis of the mixing ratio of various precious metals.
Measurement range 0.03~ 50μm, resolution 0.01μm, support single-layer, multi-layer and alloy platings testing, built-in thermal printer to automatically output statistical reports, suitable for wire and columnar workpieces.
The large sink design is used to reduce buoyancy error, the density accuracy is 0.001g/cm ³, and the Brazilian fire gold with coating thickness > 30μm can be tested, and the mixing ratio of various precious metals can be measured.
Using Spectrophotometric method, spectra-trophotometry to detect nickel concentration, detection limit of 0.1mg/L, equipped with imported cold light source life of 100,000 hours, support a variety of Measurement mode and wireless data transmission function.
Measurement range 0.03-50 um, resolution 0.01um, supports multi-layer platings and alloy platings measurement, with custom hotkeys and LCD display, easy to operate without adjusting Sensitivity.
Using Spectrophotometric method, specs-trophotometry to detect nickel content, Measurement range 0.00-7 g/L, accuracy +/- 0.10g/L, equipped with LED@575nm Illuminant, easy to operate without complex pretreatment, suitable for rapid batch detection needs.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Colorimetric analysis is achieved using a pre-measurement design, which reacts with nickel to form a blue complex. Measurement range covers 0.00 to 7.00 g/L, and it is suitable for a variety of Photometer instruments.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Density accuracy of 0.001g/cm ³, maximum weighing 310g, built-in density reference can be customized settings, support solid liquid powder and Water Absorbency sample testing, equipped with level indicator and overload alarm function.
Measurement accuracy of 0.001g/cm ³, support temperature compensation and mixed specific gravity measurement, can cycle display K number and purity%, with over-limit prompt function, operation only needs two steps.
Measurement range 5-600g, density accuracy 0.001g/cm ³, with temperature compensation and mixing ratio measurement function, without leaving traces after testing.
Measurement principle of hanging water method, density accuracy of 0.001g/cm ³, support one key zero and temperature compensation function, can cycle display K number and purity percentage, and have mixed specific gravity determination and over-limit prompt function.
