The device uses mechatronics design, weight only 3.5kg easy to carry; equipped with High Accuracy S type Sensor, accuracy of 0.5% F.S; support 0.1-50 mm/min adjustable drawing speed, built-in lithium battery for outdoor use.
Electric Circle-drawing is used to ensure uniform speed and constant strength, Travel 20-80mm adjustable, Rotation speed 10-120 +/- 1 rpm adjustable, equipped with automatic judgment prompts and precision dual rail system to improve test Repeatability and data accuracy.
Contains 12 types of tie Rods and adapters from M6 to M30, suitable for a wide range of bolt sizes, providing comprehensive inspection coverage.
Hollow self-resetting hydraulic cylinder structure, maximum pulling force 500kN, Indication Error ≤ +/- 1% F. S; with 240 * 320 color Touchscreen, support automatic data storage and drawing force-time Linear dispersion display function.
Maximum pulling force 50kN, hollow self-reset structure, digital pressure Gauge with automatic calculation, backlight, peak holding function, manual pump maximum Operating Pressure 63MPa, compact and portable structure.
Adopt photoelectric detection and microcomputer servo system, High Sensitivity, Measurement range +/- 45 °, Minimum reading +/- 0.001 °, Repeatability ≤ 0.002 °, LED display and membrane switch operation for easy reading, Cast aluminum base to ensure Stability.
Adopting manual sprocket drive structure, Working Travel ≥ 80mm, equipped with four weight combinations, accurate drawing is achieved through replaceable 808 stylus, and different diaMeter graphics are supported.
2 samples can be measured at the same time, using platinum temperature sensor and digital Optical inspection sensor, temperature control accuracy 0.1 ℃, heating rate 0.1-10 ℃/min, automatic recording of the experimental process.
The steel stylus is used for precision drawing, the diaMeter range is 0-10.5 mm, and it is equipped with multiple sets of weights to achieve accurate loading.
Hollow self-resetting hydraulic cylinder design, center aperture 18mm, with peak holding and automatic shutdown functions, manual pump pressurization, suitable for laboratory and field use.
Adopt cold Illuminant narrow-band interference Optical inspection system, Optical inspection stability is less than 0.002A/20min, support room temperature to 180 ℃ stepless temperature control, anti-chlorine interference up to 2000mg/L, batch processing of 20 water samples, easy to operate without changing pipes.
The CMOS integrated circuit is used to ensure stable counting, and the 7W energy-saving ring lamp side-shot illumination makes the colony contrast clear. The counter capacity is 0-999 to meet the needs of conventional detection. The probe pen marking function is avoided, and the repeability count is performed.
Hollow self-resetting hydraulic cylinder design, maximum pulling force 30kN, center aperture 18mm, with peak holding and automatic shutdown function, simple operation suitable for on-site use.
The pressure-sensitive element is used for automatic counting, the diaMeter of the culture dish supports ≤ Φ 90 mm, and it is equipped with dark deep background and annular fluorescent side-shot lighting. The colony contrast is clear, and the counting is fast and reliable.
The four-pin design is equipped with four sizes of scribing needles, which can automatically draw a circular track with a diaMeter of 100mm, support three cycle modes of 6/12/24 hours, and the measurement error is controlled within +/- 0.5%.
