With a capacity of 2.5 liters, it adopts a single-layer structure design and is suitable for a variety of Power Dispersers to ensure efficient and stable material handling and easy operation.
Integrated Incubator and Shaker functions, Oscillation Frequency 40~ 300rpm, Temperature range RT + 5~ 65 ℃, 304 stainless steel liner and microcomputer PID control, with UV sterilization and automatic storage setting paraMeters.
Integrated Incubator and Shaker functions, small footprint and large bottle load; Temperature range 4~ 65 ℃, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner for easy cleaning, quiet operation and support multi-stage programming.
Measurement range 0.1~ 35μm, resolution 0.01μm, can measure more than 20 platings combinations such as Cr, Ni, Cu, etc., support single-layer and composite multi-layer measurement, equipped with 4 quick plating selection buttons to avoid misoperation.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
Three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, large-screen LCD display multiple sets of data, power-off automatic saving paraMeters, low heat dissipation DC motor supports long-term continuous operation.
Integrated Incubator and Shaker functions, small footprint and large bottle capacity; Microcomputer PID control temperature and Oscillation Frequency, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner is easy to clean, supports multi-stage programming and UV sterilization to ensure safe and efficient operation.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Using Konig swing Rod, mass 200g, swing period 1.4 +/- 0.02s, can swing 250 +/- 10s on flat Glass, suitable for coating damping test, accurate measurement Hardness change.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, support long-term continuous operation, with gentle start and Rotation speed monitoring function, to prevent sample spill and equipment failure.
Measurement range 20-1000J/m ², accuracy of +/- 1-2J/m ², support 25.4mm sample size and 0-40kg/cm ² adjustable clamping force, equipped with thermal printer and LCD display.
Measurement range 0.03~ 50μm, resolution 0.01μm, support single-layer, multi-layer and alloy platings testing, built-in thermal printer to automatically output statistical reports, suitable for wire and columnar workpieces.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
