With a capacity of 2.5 liters, it adopts a single-layer structure design and is suitable for a variety of Power Dispersers to ensure efficient and stable material handling and easy operation.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Glass material, Measurement range 0-13 pH, Temperature resistance 0-100 ℃, Single ceramic dialysis hole design to improve Stability, suitable for high temperature and high voltage environment.
Using Konig swing Rod, mass 200g, swing period 1.4 +/- 0.02s, can swing 250 +/- 10s on flat Glass, suitable for coating damping test, accurate measurement Hardness change.
Using laser reflection principle to achieve one-sided measurement, accuracy of 0.1mm, can simultaneously obtain multi-layer Glass and air layer Film thickness, support automatic and manual mode, adapt to three glass two Chambers, laminated Glass and other materials.
Using 15mm thick Organic Glass sealing barrel, pressure range 0~ -95kPa accuracy +/- 0.1kPa. With automatic pressure replenishment and dual test mode, support thermal printing and data management functions.
Measurement range 0.1~ 35μm, resolution 0.01μm, can measure more than 20 platings combinations such as Cr, Ni, Cu, etc., support single-layer and composite multi-layer measurement, equipped with 4 quick plating selection buttons to avoid misoperation.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Measurement range 20-1000J/m ², accuracy of +/- 1-2J/m ², support 25.4mm sample size and 0-40kg/cm ² adjustable clamping force, equipped with thermal printer and LCD display.
Measurement range 0.03~ 50μm, resolution 0.01μm, support single-layer, multi-layer and alloy platings testing, built-in thermal printer to automatically output statistical reports, suitable for wire and columnar workpieces.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Equipped with microwave and ultrasonic synergy function, 2000ml large-capacity reactor and 1800W ultrasonic power, support platinum resistance accurate temperature measurement and magnetic stirring, and realize multi-mode chemical reaction control.
Single person single-sided vertical quasi-closed structure effectively prevents external gas induction, adjustable air volume system maintains 0.25~ 0.6m/s wind speed, equipped with double suspended Glass doors and convenient maintenance design.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
