Using 60cpm Friction Frequency and 9N Friction Load, the specified number of times of friction can be carried out through the friction head of parcel white cotton cloth, and the sample dyeing Stability can be evaluated according to the gray card comparison.
The equipment adopts the principle of magnetic field magnetization, lifting force of 7.5Kg, Scanning range of 20~ 200mm, equipped with LED lighting and movable joints, suitable for the detection of various shapes of workpieces.
The equipment adopts white water circulation system, equipped with electric sizing and aeRodynamic bubble homogenizing functions, the diaMeter of the extraction cylinder is 200mm and the capacity is 8 liters. It supports external vacuum suction, and the volume is small and easy to move.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
The equipment provides a 100-level clean environment, with an average wind speed of 0.3 to 0.6m/s and a vibration half-peak of less than or equal to 3μm, ensuring a stable and free experimental process.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
The equipment adopts the mechanical action of flying knife roller and bottom knife, which can handle 200-700g absolute dry slurry, the speed of flying knife roller is 500 +/- 10rpm, and supports heavy thallium pressure adjustment and automatic beating time control, so as to realize fiber refinement and beating degree. Precise regulation.
Measurement accuracy with professional calibrating services for quality control and equipment maintenance, purchased with Coating thickness Gauge.
It can detect 0.5-3 mm surface defects, detect a minimum width of 0.1 micron, and is equipped with four Probe to adapt to different shapes of workpieces. It is ergonomically designed for easy operation and control.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measuring temperature 90 ℃ and the error is only +/- 1 ℃, the melting state can be observed at a distance, directly pasted and used to visually display the overheating of the equipment.
The flat field objective and eyepiece are used to provide a clear flat field of view, with a total magnification of 100X to 1250X. They are equipped with a double-decked mechanical stage and an epiphany lighting system, and support dual-path output for easy observation and imaging.
Operating temperature up to 1100 ℃, Furnace size Φ 60 × 1000mm, using Air-Cooled system to ensure stable operation of the equipment, suitable for material sintering in an inert gas environment.
The non-heat centrifugal circulating pump is used to avoid its own heat generation affecting the temperature field, with a Temperature Uniformity of +/- 0.05 ° C and multiple Safety protection devices to ensure stable operation of the equipment.
