Equipped with 10-station synchronous test capability, 1000g weight and 1-999999 minute Timer, using SUS #304 steel plate to ensure test accuracy, and automatically recording tape peeling time.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
11/16 inch standard width paper tape, capable of completing approximately 1800 cycles of testing per roll, must be stored at 23 +/- 2 ° C and 50 +/- 10% Humidity to ensure Stability.
Adopt replica tape method to measure surface roughness, Peak Measurement range 20~ 115μm, accuracy +/- 5μm, with automatic subtracting substrate function, High Protection Rating, anti-solvent and water dust.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
Compact and lightweight can be operated with one hand, without support and testing experience, the test range is equivalent to brinell hardness 25~ 150HB, can measure a variety of Hardness scales and has MAX Maximum hold and average calculation functions.
Adopt four-link mechanism to ensure a constant 45 ° test angle, equipped with 500/750/1000g adjustable load, accurately determine film Hardness through different Hardness pencil scratches, meeting standard test Environmental requirements.
The 45 ° fixed angle design is adopted to ensure that the cylindrical pencil lead maintains a constant angle and pressure, the load is 500g, the error is +/- 10g, and the coating Hardness level is determined by the minimum Hardness value pencil trace.
Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
Compact size is only 130 * 76 * 32mm, supports 9 kinds of hardness of materials measurement, can store 50 sets of data and realize six kinds of Hardness standard conversion, equipped with RS232 interface for data communication.
