It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
The 4-sided paint design can be prepared with four different thickness wet-film, application width 75mm, accuracy +/- 3μm, corrosion-resistant stainless steel material, easy to clean and durable.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
The cylindrical design is equipped with 4 coating surfaces, which can be coated with four preset thicknesses at one time, the application width is 80mm, the accuracy is +/- 3μm, and it is resistant to acid and alkali corrosion.
Moulding accuracy, small size, can be prepared 12 kinds of wet film thickness, range 30-600μm, Spreader width is not less than 60mm, especially in the Moulding process Coating does not spill.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Servo motor drive, coating speed 1~ 500mm/S adjustable, film accuracy of +/- 0.002mm, magnetic head fixed and 4-sided Applicator design to improve the convenience of operation and Spreader uniformity.
With bar and Drawdown blade two coating methods, coating speed 1-300mm/s stepless speed regulation, Blade Coating thickness 0.1-10 mm, using clamshell design for easy cleaning, equipped with High Accuracy Film Applicator to ensure Spreader uniformity.
Spreader accuracy of +/- 0.003mm, thickness range of 0~ 10mm, stepless variable speed control, coating speed 5~ 180mm/s, heating temperature up to 180 ℃, equipped with removable Drawdown blade and aluminum alloy coating table, to meet the needs of different materials film.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
