It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
High Accuracy Electromagnetic Force equilibrating Sensor, stable reading within 2 seconds, adjustable weighing speed of fast, medium and slow, and equipped with RS-232 interface for data connection.
High-speed DSP processor is used to improve Measurement speed, support Ra0.05-10.0 μ m Measurement range, Sensor host integrated design is convenient for field use, and can measure the cone surface and groove of the outer circle.
It can measure planar and cylindrical surface roughness, with a minimum diaMeter of 5mm and a maximum depth of 22mm, and supports a variety of Sensors to adapt to different workpiece shapes.
It can measure the surface roughness of the hole with an aperture greater than 2mm, and the maximum depth is 9mm. It supports both flat and cylindrical measurement, and is suitable for a variety of special-shaped surface detection needs.
Imported High Accuracy Electrochemical sensor, detection limit up to 0.001ppm. Support 4-20mA, RS485 and other signal output, with overvoltage, lightning protection, short circuit and other multiple protection and automatic recovery functions.
High-precision Sensor is used to ensure accurate and stable weighing, Response Time ≤ 3 seconds to quickly display results, with practical functions such as peeling, counting, unit conversion, etc., and the front horizontal bubble is easy to adjust.
High-precision Sensor is used to ensure accurate and stable weighing, battery is equipped to achieve AC and DC dual-use, Response Time ≤ 3 seconds, LCD with backlight display operation is simple and intuitive.
Adopt replica tape method to measure surface roughness, Peak Measurement range 20~ 115μm, accuracy +/- 5μm, with automatic subtracting substrate function, High Protection Rating, anti-solvent and water dust.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
Provide 25, 40, 70, 100 four profile specifications, size 87x87x2.5mm, weight only 60 grams, Portable design is convenient for quick comparison and evaluation on site.
High Accuracy Inductance Sensor with Diamond stylus, Measurement accuracy is not more than +/- 10%, supports RC, GAUSS and other four filtering methods, built-in lithium battery can store 7 sets of data.
Measurement range 0~ 500μm, stylus angle 60 degrees, can measure more than 50 readings per minute, with built-in temperature compensation and aluminum oxide wear surface design, in line with ASTM D4417 and other international standards.
High-precision Sensor for 0.01g Readability and 0.001g/cm ³ density accuracy, built-in multiple density references and rigorous calculation programs, supports solid liquid sample testing and directly displays density results.
