The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted and used without complicated operation, and is suitable for temperature monitoring of various electrical equipment.
Irreversible discoloration design to ensure permanent preservation of temperature records, 85 ° C accurate temperature measurement point with 2x2cm circular patch, Pressure sensitive adhesive layer to achieve firm paste and its own protective film to enhance durability
Measuring temperature 90 ℃ and the error is only +/- 1 ℃, the melting state can be observed at a distance, directly pasted and used to visually display the overheating of the equipment.
The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
Adopt wear-resistant ruby Probe, measurement range 0~ 1250μm, error +/- 2~ 3%, built-in LED indicator light, IP65 dustproof and waterproof, chemical resistant, suitable for industrial environment.
The rated temperature is 55 ° C and the error is only +/- 1 ° C. The melting situation can be observed remotely, and it can be directly pasted for use in busbars or equipment terminals to monitor temperature changes.
Precision up to +/- 1 ° C error, can observe the melting state at a distance, visually display temperature changes, suitable for temperature monitoring of various electrical equipment connection parts.
Rated temperature 60 ℃ accuracy +/- 1 ℃, can observe the melting state at a distance, directly paste the use without complicated operation, suitable for a variety of electrical equipment temperature monitoring.
With indoor and outdoor temperature measurement function, the range covers -50 ° C to 99 ° C, the humidity measurement accuracy reaches +/- 5% RH, the maximum and minimum temperature and humidity values can be recorded, and the base and wall mounting are supported.
Adopt wear-resistant ruby Probe, measurement range 0~ 3000μm, error +/- 2~ 3%, IP65 Protection Rating, chemical-resistant material, suitable for chemical cleaning, built-in LED indicator light to facilitate over-limit detection.
Irreversible monochrome discoloration design, permanent display after overheating, anti-fouling protective film provides waterproof and oil-proof performance, specification 2.5x4 cm, service life 3 years indoors and 2 years outdoors.
Suitable for 0~ 80 ℃ high temperature environment, Measurement accuracy of 0.01pH, Sensitivity high, more than 60 ℃ can still work stably, with Calomel electRode through potential changes reflect the pH value of the solution.
A bending angle is less than 45 degrees, can test 0.5~ 1.0mm Film thickness sample, flattening mechanism stroke is not less than 10mm, using crank lifting mechanism to achieve T-shaped bending test.
Pointer indicator reading, accuracy of +/- 1% FS, with peak protection function and continuous load indication free switching, with tolerance band indicator for batch testing, support Newton and kilogram dual unit display.
