Flame Temperature Measuring Instrument

The flame temperature measuring instrument detects the infrared radiation intensity of the flame and converts the thermal radiation signal into a temperature reading. It is used to monitor the temperature of combustion equipment, providing real-time feedback on the flame status in industrial settings such as boilers and furnaces, ensuring the stability of the combustion process.
Selection
When selecting, ensure the temperature measurement range covers the actual flame temperature, and the response speed matches the frequency of equipment changes. Consider the on-site installation distance and viewing angle, and ensure the protection level is suitable for environmental dust and vibration. Ensure compatibility with the signal output type of the existing control system, and perform regular calibration and maintenance to ensure measurement accuracy.
type
How it works
upper limit of temperature measurement
lower limit of temperature measurement
DS object distance ratio
precision

Terms

Standards

Instruments

Using concave Holographic grating spectroscopy, Light spectrum is pure and accurate, pass band is narrow, Sensitivity is high; Five elements can be combined with any combination at the same time, automatic ignition and flame monitoring, Response Time is less than 8 seconds, Stability change within 15 seconds ≤ 2%.

$ 2655.00

Using dual Sensor temperature measurement system, the maximum operating temperature is 380 ℃, Temperature range environment temperature to 380 ℃, support continuous work, large heating area and no open flame design.

$ 140.00

Using dual-channel proportional value display, knob type operation is easy, flame size can be pre-selected, equipped with flameout protection device. Detection limit K ≤ 0.004mmol/L, Na ≤ 0.008mmol/L, Response Time < 8S, high stability.

$ 820.00

The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, heating area and heating up fast, the highest temperature 380 ℃, power 2500W, no open flame design to avoid bumping Glass ware.

$ 344.00

Dual channel LED digital display, using silicon Photocell, photovoltaic cell detection, measurement Repeatability relative standard deviation ≤ 2%, can simultaneously detect various elements of potassium, sodium, lithium, calcium and barium, the sample amount is small and Sensitivity is high.

$ 1493.00

Dual channel LED digital display, potassium and sodium can be detected at the same time, lithium calcium function expansion, silicon Photocell, photovoltaic cell detection accuracy is high, Linearity ≤ 0.07, detection limit is as low as 0.004mmol/L, sample volume is small Sensitivity is high, flameout protection is safe and reliable.

$ 1493.00

The use of high-temperature non-alkali fiberglass insulation material wOven into a hemispherical internal thermal structure, heating area and heating fast, the highest temperature 380 ℃ and support continuous work, no open flame design to avoid bumping Glass ware.

$ 119.00

Photocell, photovoltaic cell detection to ensure accurate and stable measurement, potassium and sodium detection limit of 0.004mmol/L and 0.008mmol/L, Response Time is less than 8 seconds, support lithium calcium detection function.

$ 904.00

Silicon Photocell, photovoltaic cell detection to ensure accurate and stable measurement, potassium and sodium detection limit of 0.004mmol/L and 0.008mmol/L, support lithium calcium detection function, small sample and Sensitivity.

$ 961.00

The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, heating area and heating fast, the highest temperature of 380 ℃, with electronic voltage regulation function can achieve accurate temperature control, no open flame design to avoid bruising Glass ware.

$ 122.00

Silicon Photocell, photovoltaic cell detection to ensure accurate and stable measurement, potassium and sodium can be detected at the same time and have lithium calcium detection function, small sample Sensitivity, Response Time is less than 8 seconds, with flameout protection function safe and reliable.

$ 677.00

Dual channel LED display, automatic ignition design, using silicon Photocell, photovoltaic cell detection, Sodium Measurement range 0.0-200 mmol/L, Lithium Measurement range 0-15mmol/L, Sensitivity is high and the sample volume is small.

$ 1493.00

Silicon Photocell, photovoltaic cell detection to ensure accurate and stable measurement, can simultaneously detect potassium, sodium, lithium, calcium and barium elements, small sample Sensitivity, with automatic ignition and flameout protection function safe and reliable.

$ 1493.00

Dual-channel LED digital display, Silicon Photocell, photovoltaic cell detection to ensure accurate and stable, potassium, sodium, lithium, calcium and barium multi-element simultaneous detection, Sensitivity is high and the sample amount is small, Linearity ≤ 0.07.

$ 1493.00

Dual-channel LED digital display clear reading, button automatic ignition fast and reliable, can simultaneously detect potassium and sodium and support lithium calcium barium measurement, using silicon Photocell, photovoltaic cell detection accuracy, small sample Sensitivity, with flameout protection safety function.

$ 1493.00