With high and low turbidity ranges (0.00-9 and 100-1000NTU) and residual chlorine total chlorine measurement (0.00-5 mg/L), using EPA-specific Illuminant, supporting chroma compensation and Automatic calibration, storing 200 sets of data, suitable for a variety of water quality testing scenarios.
Simultaneous measurement of residual chlorine, chlorine dioxide, total chlorine and other five paraMeters, resolution of 0.001mg/L, Repeatability 2%, micro-processing technology and high Reliability integrated circuit to ensure long-term stable work.
Measurement range covers 0~ 5mg/L residual chlorine total chlorine and 0~ 10mg/L chlorine dioxide, support 100 measurements, suitable for water quality testing, easy and fast operation.
Measurement range 0~ 5mg/L, can carry out 100 measurements, suitable for a variety of water quality analysis instruments, easy to operate quickly detect residual chlorine and total chlorine content.
Measurement range 0~ 500 ppm, accuracy +/- 3 ppm, support for CAL CheckTM Adjustment, suitable for a variety of water quality testing scenarios.
8Nm Narrowband Interference filter and LED Illuminant, wavelength accuracy +/- 1nm, support residual chlorine and total chlorine 0.00-5 mg/L Measurement range, built-in reaction Timer and 50 sets of Data storage, with IP67 waterproof performance.
Measurement range 0.00~ 3.50 ppm, accuracy +/- 0.03 ppm, using LED Illuminant and automatic shutdown function, easy and fast operation, suitable for a variety of water quality monitoring scenarios.
Simultaneous measurement of turbidity, residual chlorine and total chlorine with EPA custom Illuminant, USEPA 180.1 compliant, automatic range conversion, turbidity Measurement range from 0.00 to 4000 NTU, support for multi-unit display and GLP data management.
LED Illuminant provides stable detection performance, supports CAL CheckTM calibrated verification, Measurement range 0-500ppb, accuracy +/- 5ppb, with reference to USEPA method 330.5 and DPD method for ultra-low concentration total chlorine detection.
Designed for residual chlorine ElectRode, with a capacity of 250ml, it provides stable calibrating performance, ensures reliable measurement results, and is suitable for a variety of water quality analysis scenarios.
Using BNC connector design, equipped with 60mL calibrated solution and residual chlorine regulator, replaceable membrane to extend service life, suitable for water quality monitoring.
Using micro-processing technology and high Reliability integrated circuit, with data nonlinear processing and smoothing function, fast automatic multi-point correction, Measurement range residual chlorine 0~ 2.5mg/L, chlorine dioxide 0~ 5.0mg/L, Repeatability 2%, to ensure long-term stable work.
Measurement range 0.000~ 1.000mg/L, including 100mL molybdate solution, 25 packs of ascorbic acid powder and 25 packs of potassium persulfate powder, suitable for water quality total phosphorus detection.
Designed for residual chlorine ElectRode Reagent, 250ml size, provides stable ionic strength adjustment to ensure fast and accurate ElectRode Response in the measurement process, suitable for various water quality testing environments.
Iodine Reagent Formula specially designed for residual chlorine ElectRode, 250ml Encasement to meet routine testing needs, with ElectRode can improve Measurement accuracy and Stability, suitable for a variety of water quality environments.
