Large diaMeter centrifugal wind turbine to ensure uniform heat flow, Temperature range RT + 5~ 250 ℃, Temperature Accuracy +/- 1 ℃, with microcomputer PID self-tuning and timing function, suitable for long-term continuous use.
Large diaMeter centrifugal wind turbine to ensure uniform heat flow, Temperature range RT + 5~ 250 ℃, Temperature Accuracy +/- 0.5 ℃, suitable for long-term uninterrupted use, optional independent thermostat to enhance safety.
Simultaneous measurement of wind speed, wind temperature, wave height, wind level and air volume, equipped with low friction bearing impeller Sensor to ensure +/- 2% accuracy, support 24 data storage and USB/Bluetooth communication methods.
It can simultaneously measure 6 paraMeters such as wind speed, wind temperature and wind direction, equipped with 24 sets of Data storage functions, adopts ultra-low friction bearings to ensure High Accuracy measurement, and supports USB and Bluetooth data transmission methods.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
Temperature range RT + 5~ 250 ℃, Temperature Accuracy +/- 0.5 ℃, suitable for long-term uninterrupted use, optional independent thermostat and explosion-proof accessories to enhance safety.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
The wind speed is controlled in the range of 3 +/- 0.3m/s, equipped with axial flow fan and automatic timing function, which can simulate the drying process under specified conditions and effectively detect the surface crazing of the material.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Adopt intelligent PID self-tuning temperature control, Temperature Accuracy up to +/- 0.5 ℃, equipped with large diaMeter centrifugal wind turbine to optimize heat flow, support long-term continuous operation, suitable for mass pRoduction environment.
Infrared heat source for fast drying, Power 550W, metal material to ensure durability, built-in heating element to pRoduce uniform heat cycle, effective evaporation of water, suitable for drying various materials.
Far infrared radiation heating technology, temperature control accuracy +/- 2 ℃, equipped with thermistor control thermoMeter, rapid low consumption drying, Inner Chamber dimensions 320 * 380 * 320mm.
With 0.3~ 45m/s wide range wind speed measurement and 0~ 45 ℃ wind temperature detection capabilities, support multi-unit switching and maximum MIN Minimum recording, equipped with backlight display and low power prompt function, resolution of 0.001m/s.
Simultaneous measurement of wind speed, wind temperature, wave height and air volume, equipped with 24 sets of data storage functions, sampling rate of about 1 second, low friction bearing impeller Sensor to ensure measurement accuracy.
Far infrared radiation heating technology, Temperature range RT +~ 300 ℃, temperature fluctuation +/- 2 ℃, equipped with thermistor control thermoMeter, with fast, low consumption, easy adjustment and other advantages, suitable for drying a variety of samples.
