The pumping rate is up to 30L/min, the ultimate pressure is > 0.08Mpa, the oil-free design and PTFE diaphragm material are used, the noise is lower than 50dB, and it can operate continuously for 24 hours with simple maintenance.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
The pumping speed is up to 30L/min, the ultimate pressure is > 0.085Mpa, and the imported corrosion-resistant rubber diaphragm is adopted. The oil-free design avoids pollution, and the noise is lower than 50dB. It can work continuously and stably for 24 hours.
With imported corrosion-resistant rubber diaphragm, the pumping speed can reach 30L/min and the noise is lower than 50dB, which can operate continuously and stably in the oil-free state and is easy to maintain.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
Using electromagnetic motor and diaphragm sealing Chamber, maximum Vacuum Level 0.08Mpa, full Teflon material resistant to strong chemical corrosion, free of daily maintenance and long service life.
Using oil-free vacuum pump to achieve pollution-free work, with three-speed Vacuum Level conversion and 0.01s high resolution, intelligent pneumatic pressure to ensure Test accuracy and efficiency.
The pumping speed is 60L/min, the ultimate pressure is > 0.085Mpa, the positive and negative pressure is dual-use, the oil-free operation, the noise is lower than 50dB, it can work continuously for 24 hours, and the maintenance is simple.
The diaphragm sealing Chamber is used to ensure the one-way flow of gas, the maximum Vacuum Level is 0.08Mpa, the pumping rate is 35L/min, and it has the function of positive and negative pressure dual-use. The full Teflon material can resist strong chemical corrosion, free of daily maintenance and long service life.
With imported corrosion-resistant rubber diaphragm, the ultimate pressure reaches 0.085MPa, the pumping speed is 30L/min, and the noise is lower than 50dB. It can operate continuously and stably for 24 hours without lubricating oil.
The pumping speed is up to 30L/min, the ultimate pressure is > 0.095MPa, and the dual-stage design and imported corrosion-resistant rubber diaphragm are adopted. The noise is lower than 50dB, allowing for 24-hour continuous and stable operation.
The pumping rate is up to 30L/min, the ultimate pressure exceeds 0.085Mpa, and the imported corrosion-resistant rubber diaphragm is used. The noise is less than 50 decibels, and it can operate continuously for 24 hours without lubrication and maintenance.
The pumping speed is up to 30L/min, the ultimate pressure is > 0.08Mpa, the oil-free design and PTFE diaphragm material are used, the noise is lower than 50dB, and it can operate continuously for 24 hours.
Adopt oil-free vacuum pump to achieve pollution-free measurement, equipped with automatic switching function of large and small volume chambers, the test range covers 0-9999 seconds, supports automatic calculation of front and back smoothness, and the sealing meets the requirements of national standards.
The pumping speed is up to 30L/min and the noise is lower than 50dB. It adopts imported corrosion-resistant rubber diaphragm, supports positive and negative pressure dual-use function, and can operate continuously and stably for 24 hours. It is easy to maintain without lubrication.
