The fat content was determined by Soxhlet extraction principle, the measurement range was 0.5% -60%, and two samples could be processed at the same time.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
Using Soxhlet extraction principle, 6 tubes were measured at the same time, Temperature range + 5-100 ℃, Heating power 1000W, Glass grinding mouth connection sealing, operation saving time and effort.
Equipment Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory movement to ensure that the sample test conditions independent equality, equipped with automatic chill down system to maintain temperature stability.
Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory motion to ensure that the sample test conditions are independent and equal, equipped with automatic chill down system to maintain temperature stability.
Power 2.5-250 W continuously adjustable, crushing capacity 0.1~ 150ml, equipped with sample temperature detection display and frequency automatic tracking function, support automatic and manual Operating Mode, suitable for small volume Sample Handling.
Power 4-400W continuously adjustable, crushing capacity 0.1-300 ml, titanium alloy horn to extend life, support automatic Frequency tracking and temperature detection, suitable for efficient processing of small samples.
The integrated design of Probe and host is used, and the volume is small and the Processing capacity is large; the horn is made of titanium alloy, which has high strength and corrosion resistance; the Power 2.5-250 W is continuously adjustable, and the crushing capacity is 0.1-150 ml, which is suitable for micro Sample Handling.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
Using manual temperature compensation and imported integrated components, Measurement accuracy up to 0.01pH, Stability zero drift ≤ 0.01pH/2h, Support three point calibrating and Data storage extraction function.
Using white water circulation and electric water supply system, equipped with bubble homogenization and manual homogenization dual-use functions, the diaMeter of the extraction cylinder is 200mm, the capacity is 10 liters, and the sealing and clamping device avoids burring leakage.
The pressure of 0-700N can be adjusted to adapt to different substrates, the separate transfer system is easy to clean and maintain, supports the calculation function of inks transfer rate, and uses the middle ink extraction method to improve the lateral uniformity.
The equipment adopts white water circulation system, equipped with electric sizing and aeRodynamic bubble homogenizing functions, the diaMeter of the extraction cylinder is 200mm and the capacity is 8 liters. It supports external vacuum suction, and the volume is small and easy to move.
The equipment adopts elliptical trajectory vertical movement, vibration Frequency 40-60Hz adjustable, maximum load 30kg, equipped with automatic chill down system to keep the sample temperature stable, ensure the test conditions are independent and equal.
