Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Driven by DC motor, the clamping disc rises and falls rapidly, supports 0-2 hours oscillation time adjustment; with automatic pressure adjustment function to avoid container damage, with 680-710 times/minute Frequency to achieve up and down before and after multi-shake mixing, the main motor Power 750W.
The eccentric spherical shaft design ensures uniform mixing, and the fixed speed of 2800RPM realizes fast vortex mixing. The TPU material countertop is wear-resistant and corrosion-resistant, small in size and low in noise.
Adopting stepless speed regulation technology with a maximum speed of 2800RPM, equipped with eccentric spherical shaft and wear-resistant TPU table, supporting two continuous operating Modes of point movement, the body is resistant to acid and alkali collision and has low operating noise.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Fixed speed 2800RPM, eccentric spherical shaft design to ensure uniform mixing; TPU material work surface wear-resistant and corrosion-resistant, suitable for a variety of testtube specifications; compact size and low power consumption, suitable for long-term high-speed work.
The rotating speed can reach 30000rpm, the processing capacity is 1-250ml, the handheld lightweight design is suitable for a small amount of samples in a small container, and the corrosion-resistant stainless steel dispersion head is used for easy disassembly and cleaning. Double insulation protection ensures safety.
Fast sterilizing in ten seconds, the maximum temperature is 300 ° C, the temperature control accuracy is +/- 5 ° C, the built-in over-temperature protection device, and the stainless steel liner container ensures safety and durability.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
The eccentric spherical shaft structure ensures uniform mixing, the fixed Rotation speed is 2800rpm to provide stable oscillation, the TPU material table is resistant to corrosion and wear, supports two operating Modes of pointing and continuous, and the volume is small and the noise is low.
Rotation speed 2800RPM, eccentric spherical shaft design and TPU wear-resistant table, support point and continuous blending mode, small size and low noise, suitable for liquid, liquid-solid and powder rapid and uniform mixing.
