The three-phase asynchronous motor has high spark-free safety performance, can handle high viscosity materials and work continuously, the grinding medium is 1.6-1 zirconia beads, and the fineness of grinding is good and easy to clean.
Complete the sterilization of small metal Glass appliances within ten seconds, the maximum temperature is 300 ° C, the temperature control accuracy is +/- 5 ° C, and the built-in over-temperature protection device ensures the safe operation.
Using imported wire Rod accuracy of 1 μ m, Spreader rate 5~ 200mm/s adjustable, support scraper and wire Rod two Spreader mode, Heating Temperature Uniformity +/- 3 ℃, suitable for a variety of substrate Film thickness treatment.
Speed range 0-1500rpm, Processing capacity 5-30L, using high-performance variable frequency motor to achieve low noise and smooth operation, support a variety of stirring forms and lifting methods to adapt to different process requirements.
Spreader thickness range 0.01~ 10mm, coating speed 5~ 180mm/s, using removable drawdown blade and import bar to ensure Spreader uniformity and High Accuracy control, improve experimental repRoducibility.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design makes the conventional temperature rise less than 10 ℃, zirconia dial drive grinding medium to achieve efficient dispersion grinding.
Rotation speed up to 3000rpm, fineness of ground up to 10 microns, equipped with double-decked chill down jacket to make the temperature rise less than 10 degrees, electric lifting design easy to operate and easy to clean.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Using zirconia ceramic roller, concentricity ≤ 2μm and not easy to dye; double bearing structure eliminates vibration to improve grinding accuracy; stepless speed control Flow rate, distance adjustment accuracy 1μm, compact design is convenient for experimental table placement.
The zirconia ceramic roller is wear-resistant without black point, the adjustment accuracy is 1 μm, and the gap pressure is displayed in real time; the multi-point closed-loop drive ensures stability, the Processing capacity 0.02-20 L/hour, and the Touchscreen operation includes formula storage and pressure Linear dispersion functions.
