Equipment supports vertical and horizontal combustion test, can set combustion and extinguishing time and repeability times, automatic stop test, Internal dimensions 305 * 355 * 610mm, suitable for a variety of organic materials.
The horizontal and vertical combined oscillation mode is adopted, and any mode can be used alone. The stepless speed regulation range starts to 300 times/min, and the pendulum amplitude is 20mm, which has the characteristics of low noise and long life.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving system, the light transmitance haze accuracy is up to 0.01%, with A/C/D65 three light sources and vertical-lying dual-use observation mode, support USB interface data export, LED light source long life fast start.
Equipped with combustible gas concentration detection and alarm system, automatically cut off the gas and start the exhaust; Test space ≥ 0.5m ³, flame height 20-175mm adjustable; support a variety of combustion angle adjustment to ensure test accuracy.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
The PD array Detector is used to achieve 0.01 unit haze resolution, the open sample compartment supports vertical and horizontal dual-mode testing, and a dynamic measurement system is equipped to ensure data Reliability.
The PD array Detector is used to achieve 0.01 unit haze resolution, the open sample compartment supports vertical horizontal testing, and a dynamic measurement system is equipped to monitor environment changes to ensure data Reliability.
8L Tank Volume, Temperature range -20~ 100 ℃, Temperature Fluctuation +/- 0.05 ℃, equipped with maintenance-free pressure/suction pump, supports horizontal and vertical stirring to ensure uniform thermostatic.
Temperature range -10~ 150 ℃, Temperature Fluctuation +/- 0.01~ 0.05 ℃, maintenance-free pressure pump supports horizontal and vertical stirring, multiple safety protection including low liquid level and over-temperature protection.
The PD array Detector is used to achieve 0.01 resolution haze measurement, the open sample compartment supports vertical and horizontal dual-mode testing, and is equipped with dynamic Illuminant monitoring to ensure data Reliability and meet various international standards.
Frequency range starts to 300 times/minute stepless speed regulation, swing amplitude 20mm, low noise and low power consumption, suitable for a variety of experimental environments.
PD array Detector and Φ 4mm measurement aperture, to meet the CIE V (lambda) 2 degree visual Response, compensation measurement to ensure High Accuracy and repeatability, open sample Chamber to adapt to vertical, horizontal testing, dynamic monitoring Illuminant and environment changes.
Adopt back heating and horizontal forced convection technology to ensure uniform temperature in the studio; Temperature control accuracy up to 0.1 ° C, Fluctuation +/- 0.5 ° C; Sensor fault alarm and over-temperature protection function, Timer Range 0-9999 minutes.
Adopt back heating structure and horizontal forced convection technology to ensure studio Temperature uniformity. Equipped with High Accuracy Platinum Resistance Sensor, Temperature Fluctuation is only +/- 0.5 ° C, supports 0-9999 minutes timing function, and has multiple Safety protection mechanisms.
