Using electronic ignition and flash detection module, test process automation, Temperature range RT +~ 400 ℃, Repeatability +/- 4 ℃, with over-temperature protection and anti-dry burning function.
Measurement range 50~ 40000FPM, accuracy +/- 0.05% n + 1d, Sampling time 0.3 seconds. With automatic stop flash to extend life, external trigger to achieve automatic pattern tracking, accurate measurement Rotation speed without contact.
Using 7-inch true color Touchscreen and 32-bit microprocessor, Temperature range RT +~ 400 ℃, with automatic atmospheric pressure compensation and over-temperature protection function, the test process is fully automated.
With 15 °, 45 °, 110 ° three-angle measurement function, can simultaneously obtain Color data, flicker and particle grade; built-in automatic white calibrating, no human intervention; with stable long-life LED Illuminant, the service life is up to 10 years.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Adopt ARM microprocessor and color LCD display, with automatic heating, sweeping, ignition function, Repeatability ≤ 110 ℃ +/- 1 ℃, support atmospheric pressure correction and forced Air-Cooled, easy and reliable operation.
Equipped with 8 Measurement Angles and 6 light sources, the measurement of flicker, color flash and granularity, Color Repeatability up to 0.03Delta E * ab, high surface Measurement accuracy, suitable for special finish characterization.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Using ARM microprocessor and German technology, the test can be completed with only 1-2ml of trace samples. With automatic heating, sweeping, ignition and printing functions, no external combustible gas is required, and the operation is simple and reliable.
Using 12 Measurement Angles and industrial-grade MCUs, the measurement time is about 1 second/angle, the repeatability is up to 0.02Delta E * ab, and it supports Multi-ParaMeter measurement such as scintillation, color flash, and granularity. Measurement accuracy is high.
Adapted to NS series ColoriMeter, it can measure liquid, sauce and powder samples, realize color data collection of various forms of materials, and expand the application range of the instrument.
Rotation speed can be accurately measured without contact, Measurement range 50~ 12000FPM, accuracy +/- (0.05% n + 1d), support internal/external trigger conversion and automatic tracking function.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Using ARM microprocessor and color liquid crystal display, with automatic heating sweep ignition function, Temperature range 40~ 400 ℃, can store 1000 measurement results, support atmospheric pressure correction and forced Air-Cooled.
