The split structure can measure pipes with an inner diaMeter greater than 40mm, equipped with a 3.5-inch color Touchscreen, supports a Ra Measurement range of 0.005-32μm, and has Bluetooth interconnection and various Linear dispersion analysis functions.
Using split Probe design, Probe can be plugged and interchanged, Measurement accuracy of +/- 2% H + 1 μm, high wear-resistant carbide Probe service life of more than 500,000 times, support a variety of Calibration methods and data statistics.
With split design, Probe can be plugged and interchanged, and the service life of high wear-resistant cemented carbide Probe exceeds 500,000 times. Measurement range 0-5mm, accuracy up to +/- (2% + 1μm), can accurately measure thin coatings within 10 microns.
With split Probe design, Temperature Measurement range covering -10~ 50 ℃, can be extended to 1000 ℃, Humidity Measurement range 5~ 98% RH, error +/- 1.5 ℃ and +/- 5%, support unit conversion, portable and durable.
Measurement range 0~ 750μm, accuracy +/- 5 %/ +/- 5μm, support Bluetooth and RS-232 data output, direct measurement of surface peak and valley height.
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
Split design can directly measure the height of peak and valley, Measurement range 0~ 750um, accuracy +/- 5% or +/- 5um, support USB and Bluetooth data output and metric-to-metric unit conversion.
It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
Split structure design, Measurement range 0-1500 microns, accuracy +/- (5μm + 5%), equipped with high-resolution color LCD display, support 250 Data storage, in line with many international standards.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
Sensor and host split design, measurement range 3-80%, accuracy +/- 0.5%, support 37 kinds of grain type measurement, with temperature and humidity compensation function, Response Time is only 1 second, Portable structure is convenient for on-site rapid detection.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
Split design, tablet PC control, Bluetooth 4.0 wireless communication, Measurement range Ra 025-12.5 μm, support for a variety of Sensors and auxiliary clamping devices, compact body to adapt to complex working conditions.
