Using reticulated roller painting technology, Spreader thickness range 0.005-3mm, bonding speed 1~ 10m/min servo control, drying temperature up to 200 ℃, suitable for a variety of non-elastic material composite processing.
Using magnetic Induction and eddy Current principle simultaneous measurement composite coatings, Measurement range 0~ 1500μm, error +/- 1%, can display a single coating and zinc layer thickness, suitable for the accurate detection of ferrous and non-ferrous substrates.
Using magnetic Induction and eddy Current dual principle, it can simultaneously measure paints and zinc layer thickness. Measurement range is 0-1500 μm, accuracy is +/- 1%, suitable for composite coating system inspection.
Using drawdown blade and roller coating double Spreader head device, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, with automatic correction and precision thickness adjustment function.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
Spreader double head device, drawdown blade and roller coating free switching, Spreader thickness range of 0.005-3mm, drying temperature RT +~ 200 ℃, servo control bonding speed of 1~ 10m/min, suitable for non-elastic material composite.
Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
The equipment adopts the immersion coating method, the effective application width is 500mm, the mechanical speed is adjustable 1.2m/min, and it is equipped with Air-Cooled system and cross-cutting device to ensure efficient and uniform coil processing.
The use of Bath coating method, effective application width 500mm, mechanical speed 1.2m/min adjustable, external infrared heating temperature control 50-150 ℃, Air-Cooled system to ensure efficient cooling down and coil mass.
The DL Impact device is suitable for small space testing, dual coil technology ensures good Repeatability and accuracy, Measurement accuracy +/- 12HL, built-in Direction Sensor automatically compensates for measurement errors.
The integrated structure is compact and portable, and the dual-coil technology is used to ensure good Repeatability and Measurement accuracy. The built-in Direction Sensor automatically compensates for errors, and supports a variety of Hardness standard conversions.
Adopt double roller painting film structure, thickness adjustment range 0.001-2mm, Spreader accuracy +/- 5%, equipped with automatic deviation correction device and digital dial Meter, coating speed 0-20m/min adjustable, drying tunnel temperature up to 150 ℃.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
