Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
Adopt double comma Blade Coating head and three independent temperature zone drying system, film accuracy up to +/- 0.005mm, drying temperature up to 250 ℃, equipped with full servo tension control and automatic deviation correction system, realize fully automated precision Spreader process from unwinding to rewinding
Adopt electric lift design, lift Travel up to 500mm; Equipped with 2200W three-phase asynchronous motor, Speed range 0-2800rpm; Support four rotation stator head replacement, adapt to different viscosity material handling needs.
Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Designed based on the Archimedes principle, it provides a 100 ml capacity specification by measuring the upward force generated by the lead hammer immersion in the liquid, and the robust and calibrated structure ensures accurate and reliable Density determination.
Immersion design, 2mm outflow aperture, viscosity measurement range 5~ 60cSt, stainless steel material, ASTM D4212 standard, correction factor 0.95~ 1.05.
Using roll-to-roll continuous solution pool mode, the width of the substrate is 200mm, and it is dried by 130 ° C hot air Oven; the solution pool can be lifted and heated, and PLC control ensures stable operation, which is suitable for a variety of substrate processing.
Using a roll-to-roll continuous solution cell process, the substrate is crystallized or attached under specific conditions. Equipped with a 130 ° C hot air Oven drying system, the effective application width is 180mm, and the mechanical speed range is 0.1-300 mm/min. The solution cell has a lifting function and a separate heating design to ensure process Stability and operation safety.
Aperture 4.26mm, viscosity measurement range 200~ 1200cSt, stainless steel corrosion resistance, portable immersion design for easy operation, correction factor 0.95~ 1.05 to ensure accuracy.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Special rotor-stator structure is adopted to achieve stepless speed regulation of 60-2800rpm, 720mm electric lift Travel, material withstands high-frequency shearing, and fine emulsification dispersion is completed in a short time.
Designed for easy immersion measurement with one hand operation, the 8mm filter diaMeter covers a specific viscosity range, and the aluminum alloy and stainless steel construction ensures durability and accurate flow time determination.
Measurement range covers common Coating viscosities with 3mm filter diaMeter, immersion design supports one-handed operation, aluminum alloy ensures durability and meets DIN 53211 requirements.
The equipment adopts the immersion coating method, the effective application width is 500mm, the mechanical speed is adjustable 1.2m/min, and it is equipped with Air-Cooled system and cross-cutting device to ensure efficient and uniform coil processing.
