It can measure planar and cylindrical surface roughness, with a minimum diaMeter of 5mm and a maximum depth of 22mm, and supports a variety of Sensors to adapt to different workpiece shapes.
It is suitable for cylindrical surface measurement with a radius greater than 3mm, and can be equipped with extension Rods and transfer Rods to expand the range of use to ensure the accuracy and flexibility of surface asperity detection.
Equipped with 2 to 12mm eight diaMeter stainless steel cylindrical mandrel, in the form of hinged bending, in line with GB6742 standard, suitable for Coating bending performance testing.
It can test the cracking of the paint film after bending 180 degrees in 1-3 seconds, and the diaMeter range of the shaft Rod is 2-32mm. It is suitable for the test plate with a thickness of not more than 1.0mm. Quick evaluation of flexibility.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
Equipped with 13 kinds of diaMeter shaft Rods, covering the range of 2-32mm, can detect 1.0mm thickness samples, evaluate the film anti-cracking performance through different bending radii, easy and accurate operation.
Adopt 0.5% F.S. High Accuracy torque Sensor, support bi-directional torque test and 400 sets of Data storage, with locking force and opening force dual Measurement mode and peak hold function, to meet the needs of a variety of Encasement container testing.
4-Sided cylindrical design Spreader four different thicknesses, application width 80mm, accuracy of +/- 3μm, stainless steel material acid and alkali corrosion resistance.
The instrument is equipped with eight kinds of diaMeter stainless steel cylindrical mandrel, which adopts the form of hinge connection bending, which can accurately test the bending deformation of coatings under different diaMeters to ensure the test Reliability.
Using coaxial cylinder structure, the sample volume is only 7-13ml, Measurement accuracy +/- 2%, equipped with RS232 interface to connect printers and computers, suitable for testing a small number of precious samples.
Equipped with 8 kinds of diaMeter shaft Rods from 2 to 12mm, the 180 degree bending test can be completed in 1-3 seconds, and the anti-cracking performance of the paint film can be evaluated with the smallest shaft Rod diaMeter, which is easy to operate.
Sampling speed up to 1920HZ, accuracy level 0.5, support three units of automatic conversion and a variety of test mode, with data storage and qualified judgment function, suitable for high-speed Impact torque detection.
The support ring contains 12 different models, covering the R10 to infinity surface range, suitable for inner and outer cylindrical and spherical surface measurement, ensuring the accuracy and Stability of surface hardness testing.
It can measure concave-convex surfaces with a radius of curvature greater than 6mm, compatible with planar and cylindrical measurements, with a minimum measurement aperture of 2mm, and a dedicated platform to achieve stable detection.
Equipped with 12 high-Hardness stainless steel shaft Rods, with a diaMeter range of 2-32mm, it supports two test methods to determine the cracking resistance of coatings, and the clamping device is designed for easy plate fixing and shaft Rod replacement.
