Made of stainless steel, the groove width is 12mm, Graduation 1.5μm, with a single groove design, suitable for fineness measurement in the range of 0-15 microns.
It can measure the surface roughness of the groove with a width of more than 3mm and a groove depth of less than 10mm, and can also measure the plane and cylinder. It can be stably detected with a special measurement platform.
It can measure the groove surface roughness with a groove width greater than 2mm and a groove depth less than 3mm, and supports both flat and cylindrical measurement. It can be accurately detected with a special measurement platform.
Double groove structure for rapid detection, accuracy of +/- 2 microns, wear and corrosion resistance, support micron, Hegman, North inclined surface of a variety of scale units, Applicable standards.
Made of stainless steel, with a groove width of 12mm and Graduation of 1.5μm, it has a single-channe structure, which is suitable for particle fineness detection and ensures Measurement accuracy and durability.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
With 5 pairs of grooves designed, the groove depth covers the range of 100 to 1000 μm, which can accurately test the surface Smoothness of paints Dry-Film and reduce unevenness such as brush marks and spray points.
The leveling is evaluated by film fringe close test, the groove depth is 250-4000 μm, and the 5 pairs of grooves are designed to facilitate the observation of fringe changes, which is suitable for Dry-Film surface Smoothness detection.
Measurement accuracy of +/- 2 microns, wear resistance and corrosion resistance, handheld operation, suitable for rapid detection of various material fineness.
Using Cr12 molybdenum vanadium material, Measurement range 0~ 25μm, Graduation 2.5μm, single groove design conforms to GB/T1724 standard, suitable for particle fineness determination.
Groove width 37mm, accuracy +/- 2 microns, hardened stainless steel material, wear resistance and corrosion resistance, graded slope design supports micron and Hegman units, suitable for rapid fineness detection.
Using Zirconia Pottery and porcelain material, with High Hardness and Abrasion Resistance, Good Chemical Stability, Suitable for high temperature environment, Range 0~ 25μm, Groove size 140 × 12.5mm, Ensure measurement accuracy and Repeatability.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
Made of stainless steel, with a slot width of 12mm and Graduation of 2.5μm, the single-channe design is easy to operate and suitable for particle fineness testing.
Made of stainless steel to ensure durability, with a groove width of 12mm and a range of 0-25μm, it is suitable for a variety of material fineness testing, and the accuracy reaches +/- 1μm to ensure measurement accuracy.
