The three-phase asynchronous motor is safe and spark-free, can handle high viscosity materials and support long-term continuous work, grinding basket volume 1.8L, speed range 0~ 3000rpm/min, to achieve efficient dispersion and refinement of grinding.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Full explosion-proof design to ensure safe operation, the main motor Power 22kW, grinding range 0-1450 rpm, equipped with 20L grinding basket and custom PTFE grinding sleeve, wear-resistant heat dissipation fast, hydraulic lift Travel 1200mm.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design makes the conventional temperature rise less than 10 ℃, zirconia dial drive grinding medium to achieve efficient dispersion grinding.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design temperature rise less than 10 ℃, equipped with zirconia bead grinding medium to achieve efficient wet grinding, separation plate using whole CNC processing life is long.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, equipped with double-decked chill down jacket temperature rise of less than 10 degrees, zirconia bead grinding medium and CNC separation plate design, easy to operate and clean.
Rotation speed 3000rpm with zirconia bead grinding medium, fineness up to 10um or less; double-decked chilled down jacket design makes the operating temperature rise less than 10º; electric lifting structure is easy to operate and clean, suitable for medium and low viscosity material processing.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Rotation speed up to 3000rpm, fineness of grinding generally up to 10um or less, liquid-liquid dispersion ground up to sub-micron or even nano level; double-decked chilled down jacket design, conventional temperature rise less than 10º, to ensure pRoduct Stability.
Rotation speed up to 3000rpm to achieve efficient grinding, fineness up to 10μm or less; double-decked chill down jacket design makes the operating temperature rise less than 10 ℃, to ensure material Stability; zirconia bead grinding medium, suitable for a variety of viscosity material processing.
Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
Rotation speed 3000rpm, using zirconia lever to drive the grinding medium high-speed collision friction, quickly reduce the material particle size. Equipped with double-decked chill down jacket, the conventional temperature rise is less than 10 ° C to ensure pRoduct Stability. Unique cavity design supports solvent circulation cleaning, easy operation and low maintenance cost.
