Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
The equipment adopts an electric lifting platform and variable frequency speed regulation, with a maximum Vacuum Level of -0.095Mpa to ensure efficient mixing of materials in a vacuum environment; the core component is SUS304 stainless steel, which is durable and easy to clean, and the compact design is suitable for a variety of application scenarios.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Using oil-free vacuum pump to achieve pollution-free work, with three-speed Vacuum Level conversion and 0.01s high resolution, intelligent pneumatic pressure to ensure Test accuracy and efficiency.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
Adopt rotary vane structure design, pumping rate up to 2L/s, Ultimate vacuum degree 6x10 ^ -2Pa, equipped with Φ 25mm standard interface, support long-term continuous operation, especially suitable for vibration and noise sensitive experimental environment.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
PTFE material, strong corrosion resistance, Maximum Flow rate 20L/min, Ultimate vacuum degree 15~ 20mbar, no pollution maintenance, low noise stable operation.
Electric lifting operation is convenient, digital frequency conversion speed range 0-3000 rpm, Power 7.5KW, 304 stainless steel shaft corrosion resistance, matching 300L vacuum closed Tank and vacuum pump, to achieve dispersion, homogenization, emulsification, crushing, coalescence, suspension, dissolving multi-function.
Adopt oil-free vacuum pump to achieve pollution-free measurement, equipped with automatic switching function of large and small volume chambers, the test range covers 0-9999 seconds, supports automatic calculation of front and back smoothness, and the sealing meets the requirements of national standards.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
