The demoulding frame design effectively reduces the accumulation of edge paints, is equipped with 4mm suspension hole to achieve non-marking vertical horizontal suspension, 0.8mm steel plate substrate to ensure test Stability, PE protective film to prevent transportation damage.
Using penetrating AISI 316 stainless steel Probe, temperature range -50.0~ 220 ℃, accuracy +/- 0.2 ℃, with boot Self-check function, easy to clean and suitable for semi-solid and frozen materials.
The stainless steel material is corrosion-resistant, with a heating area of 0.06 square Meters. The heating is fast and uniform, and the operation is safe and easy. It is suitable for a variety of temperature test requirements.
Standard light sources including D65 and UV, seamless construction to ensure no light leakage, special steel plate base for enhanced durability, no preheating and low energy consumption, support for Illuminant use time display and automatic switching function.
Heating power 500W, working area 0.03m2, rapid and uniform heating, strong corrosion resistance of stainless steel panel, safe and simple operation.
With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.
Using NTC Thermistor Sensor, temperature accuracy +/- 0.2 ° C (-30.0~ 170.0 ° C), equipped with folding stainless steel Probe can penetrate semi-solid materials, with IP67 Protection Rating and a variety of automatic shutdown modes.
The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
Using NTC Thermistor Sensor, Temperature measurement accuracy +/- 0.2 ℃, equipped with 103mm penetrating stainless steel Probe, supports a variety of automatic shutdown settings, Protection Rating up to IP67.
With CAL Check ™ boot Self-check function, temperature measurement accuracy of +/- 0.2 ℃, using penetrating AISI 316 stainless steel Probe, IP65 waterproof, suitable for semi-solid and frozen material temperature measurement.
Using aluminum alloy chuck and stainless steel pole, baseplate size 290 * 210mm, pole height 780mm, suitable for 16mm Cube lifting fixed clip, stable and durable structure.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Measurement range 7~ 40N/cm, resolution 0.1mN/m, support USB and RS-232C data output, optional Bluetooth connection, suitable for wire mesh and steel mesh tension accurate measurement.
Using special forming heater high temperature without deformation, working area of 1200cm ², Temperature range RT +~ 999 ℃, touch button operation is simple and safe.
