Equipped with 45μm sieve and 70rpm Rotation speed, it is suitable for powders or particles dispersed in water, providing stable screening performance and easy and reliable operation.
Vibration frequency up to 6000 times/min, amplitude 0-3mm continuous adjustment, support subtle, intermittent and continuous three vibration modes, reduce operating intensity and improve efficiency.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Four removable baffles are used to break the powder drop, equipped with 1.18mm aperture sieve and 25mL +/- 0.05mL glassgraduates with scale, and the measurement Stability is guaranteed by the vibration-free base, which is suitable for the accurate determination of loose density.
Temperature range -20~ 150 ℃, humidity control 30~ 98% RH, using multi-layer conductive film tempered hollow Glass observation window and ultra-fine Glass insulation cotton to ensure Temperature Uniformity ≤ +/- 2 ℃ and Humidity Fluctuation +/- 2% RH.
Frequency 159.2Hz, Acceleration output 14.14m/s ², Maximum load 150g, compact and portable, fast heating, low lateral output, suitable for rapid vibration detection system.
Frequency 159.2Hz, Acceleration output 10m/s ², Support 150g load verification, Transverse output less than 5%, Heating time less than 3 seconds, Compact handheld design for fast detection.
Cylinder volume 40L with 1020rpm dispersion shaft Rotation speed, can achieve continuous and efficient grinding dispersion, sieve discharge design is easy to change color cleaning operation
Cylinder volume 80L with 830rpm dispersion shaft Rotation speed, to achieve efficient ground dispersion; sieve discharge design for easy cleaning and color change, to adapt to different material process requirements.
The static capacity method is used to test the principle, the aperture analytical range is 3.5 to 5000 angstroms, and it is equipped with a modular stainless steel vacuum gas circuit and a metal dewar bottle, which supports DFT and MC theoretical model calculations.
Screening area of 54200m ², Vibration Frequency 400-3000 times/min adjustable, amplitude 3.2 +/- 0.1mm, compact size easy to operate, screen plate easy to disassemble, optional different gap specifications to adapt to a variety of Stocks.
Cylinder volume 120L, Rotation speed of dispersion shaft 700rpm, using sieve discharge design, can adjust the grinding medium to adapt to different fineness requirements, to achieve continuous and efficient pRoduction.
Using 1320rpm high-speed dispersion shaft, equipped with 30L grinding cylinder to achieve strong shear impact on the ground, sieve discharge design is easy to clean and change color, adapt to different material fineness adjustment.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
Cylinder volume 20L with 1320rpm dispersion shaft Rotation speed, to achieve efficient ground dispersion; the use of sieve discharge structure, support rapid color change cleaning, adapt to different material properties to adjust the grinding medium.
