Adopt four-wire resistance current detection and true RMS measurement technology, voltage range 3-600V, current range 0.5mA-20A, support half-wave measurement and upper and lower limit alarm functions to ensure measurement Stability and accuracy.
Using high-speed CPU and 32-bit MCU operation, with 0.3% basic accuracy and 3 times/second Measurement speed, support full-wave, half-wave and irregular waveform measurement, automatic range switching of voltage and current to improve Measurement accuracy.
High-speed DSP processor and phase-locked loop technology implementation of accurate Data analysis, Voltage Measurement range 3-600V, Current Measurement range 0.005-20A, with harmonic analysis function and four windows display at the same time, support upper and lower limit alarm settings.
According to the Richter Hardness Measurement principle, it can perform High Accuracy detection on all metal materials, support a variety of Hardness standard conversion, Measurement range HLD 170-960, can store 600 sets of data, equipped with true color screen and USB interface.
With 260 * 200 thermal imagery resolution and 70mK thermal Sensitivity, it can quickly locate the abnormal temperature rise point of the circuit board, support -10~ 120 ℃ temperature measurement range, equipped with adjustable lens and multi-directional adjustment bracket, easy to accurately observe the thermal distribution of the circuit board.
Test accuracy of +/- 0.01%, resolution 0.00001g/cm ³. Automatic calibration and gas path Self-check function, built-in multi-specification sample measuringflask, anti-splash test process, about 3 minutes to complete the single sample test.
Accuracy better than 0.04%, Repeatability better than 0.02%, Porous material porosity analysis and rigid foam opening and closing Pore volume percentage test.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
Support thermal deformation and Vicat softening point test, Temperature range up to 300 ℃, Temperature control accuracy +/- 0.5 ℃, mechanical mixing and large capacity Tank to ensure uniform insulation field, double control mode operation flexibility.
The transient planar heat source method is used, the test time is not more than 160 seconds, the Sensitivity is 0.00001, and the thermal conductivity of 0.0001 to 50W/(m * K) can be measured. It supports a variety of morphological samples and meets international standards.
Using oil Bath heating medium, Temperature range from room temperature to 200 ℃, temperature control accuracy +/- 0.5 ℃, equipped with sample clamping grid to ensure temperature stability, suitable for various film thermal cissing rate tests.
The two-box mobile structure is adopted, the Thermal Shock mechanism moves within 10 seconds, and the temperature recovery time is within 5 minutes. It is equipped with HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system, which has high cooling speed and efficiency. It supports paperless recording and real-time Linear dispersion display function.
Temperature resolution of 0.1 ℃ and heating rate of 0.1~ 20 ℃/min can be adjusted continuously. It supports hot stage method and visual measurement, and is suitable for the study of thermal characteristics of trace samples.
Temperature resolution is up to 0.1 ℃, heating rate is adjustable from 0.1 ℃ to 20 ℃/min, hot stage method and visual measurement are supported, which is suitable for the study of thermal characteristics of trace samples.
