Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
Fully pneumatic design ensures stable operation, adjustable spray gun settings for precise atomization and film thickness control, and magnetic panel supports multiple substrate tests.
Flow rate of spray 0-80CFM adjustable, spray distance 3-4 feet, visualize airflow direction and speed, support 30 minutes of continuous spray, easy flow and pressure equilibrate test.
Using reticulated roller painting technology, Spreader thickness range 0.005-3mm, bonding speed 1~ 10m/min servo control, drying temperature up to 200 ℃, suitable for a variety of non-elastic material composite processing.
The equipment adopts reticulated roller painting technology, Spreader thickness range 0.005-3mm, equipped with 1 Meter Air-Cooled curing box and feeding trough heating function, the temperature can reach 200 ℃, to achieve accurate Spreader control and stable composite effect.
Adopt double roller painting film structure, thickness adjustment range 0.001-2mm, Spreader accuracy +/- 5%, equipped with automatic deviation correction device and digital dial Meter, coating speed 0-20m/min adjustable, drying tunnel temperature up to 150 ℃.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
Adopt fully enclosed environmental protection Compressor refrigeration system, Temperature range -40~ 100 ℃, temperature resolution 0.01 ℃, with overheating and overcurrent multiple protection devices, high performance Stir cycle motor and flexible disassembly and assembly of side panels.
8-Channel design supports multi-point simultaneous temperature measurement, using nano-space insulation material to ensure stable operation at 300 ℃ environment for 60 minutes, equipped with K-type Thermocouple to achieve +/- 0.3 ℃ High Accuracy measurement, suitable for high temperature process monitoring.
Four-channel K-type Thermocouple with 0.5% accuracy, the insulation box can work continuously for 1 hour in a 300 degree environment, supports multi-rate sampling and 16000 Data storage, Stability is high and easy to operate.
6 channel design with nano space insulation material, can work for 60 minutes in 300 ℃ environment, accuracy of +/- 0.3 ℃, support 200,000 data recording, to achieve high temperature environment stable temperature measurement.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
The special forming process heater has no warpage deformation at high temperature, excellent corrosion resistance of the spray panel, uniform working surface temperature, Heating power 2 × 1000KW, rapid and safe heating.
Made of precision stainless steel, durable and repeatability; range 250-700 μm, Division 50 μm; in line with international measurement standards to ensure accurate painting thickness control.
Made of precision stainless steel, with a range of 50 to 950 μm, the 10-step tooth design can accurately measure wet film thickness, ensure painting mass and avoid material waste.
