Impact method using drop ball, test height range of 50-1000mm, equipped with four radius Impact head and 300-1000g weight, can accurately evaluate the material anti-Impact performance and fracture.
The device can perform drop ball impact testing in the 50-500mm height range, is equipped with 300-1000g multiple weights and 1/4 to 1/16 inch Impact head, supports manual setting, and is suitable for multiple material performance evaluation.
Equipped with 300g to 1000g heavy hammer and five kinds of punch die base, it can adjust the drop height of 50-500mm to meet the needs of anti-impact performance testing of various materials.
Impact specimens with specified weight steel balls falling freely from a set height can evaluate the resistance to rapid deformation of materials or coatings, and are suitable for testing a variety of substrates.
Impact specimens with semi-spherical punches are used for energy consumption measurement to evaluate anti-Impact performance. Impact energy range is 3J, Impact speed is 2.5m/s, and it is suitable for a variety of film and paper tests.
Impact height 120 cm, drop weight mass 1000g, punch diaMeter Φ 16mm, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure the accuracy of the test.
Impact energy 2.7mJ, Impact mass 3.0g, tungsten carbide ball head Hardness up to 1600HV, suitable for asperity 0.4um surface, providing accurate Hardness measurement.
Impact energy 90mJ, Impact mass 20g, can detect the maximum Hardness 650HV, Cedar depth 41-53μm, suitable for asperity 6.3μm surface.
Impact height up to 120 cm, weight weight mass 1000g, no secondary rebound after impact, to ensure accurate and reliable test results, suitable for film impact performance evaluation.
Impact height 0-50cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material resistance to Impact performance.
Dual scale design and special indicator ensure accurate impact distance, built-in level for easy calibration and positioning, support 1000g drop mass and a variety of punch diaMeters.
Impact height up to 120 cm, using 1000g standard hammer body, no secondary rebound phenomenon after impact, to ensure accurate and reliable test results.
Impact energy 11mJ, impact mass 7.2g, ball head Hardness 1600HV, measurable maximum Hardness 950HV, suitable for asperity 1.6μm surface, support thin layer test.
Impact height of 120 cm, Impact depth of 2.5 mm, using a fixed mass weight to avoid secondary rebound, to ensure accurate and reliable test results.
Impact height 0-100cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material anti-Impact performance.
