Special design container to ensure measurement conformity, suitable for color scheme, suitable for fine powder particle measurement, effectively avoid the influence of powder tightness and surface Smoothness.
DC24V permanent magnet brushless motor direct drive, speed range 200-3000rpm, circumferential diaMeter 4.5mm, with automatic fixture identification and over-temperature protection, noise below 45dB, support jog and continuous operation mode.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
Double pulse Back flushing automatic powder cleaning, Laminating filter accuracy of 0.3 microns, powder gas separation efficiency, stainless steel material is durable, color change operation is simple, improve dust recovery efficiency.
Using fixed funnel method to measure powder flowability, equipped with 10mm inner through Glass funnel and 0-100mm scale struts, can accurately measure cone height, meet the requirements of Pharmacopoeia and ISO standards.
Standard funnel method for metal powder flowability measurement, equipped with 2.5mm and 5mm pore diaMeter stainless steel funnel, can accurately measure 50g powder flow time to +/- 0.01s, suitable for powder testing such as cemented carbide.
The stainless steel funnel is used to ensure that the surface is smooth and free of static electricity. It is equipped with two specifications of funnel, which are suitable for free-flowing powder and caking trend powder respectively. The receiver volume is 500ml, and the sampling volume is 510-550ml, which meets the standard test requirements.
Four 25 ° inclined quartz Glass baffles are used to guide the powder flow and are equipped with a 25 +/- 0.05ml standard cylindrical Cup to achieve a loose powder state through natural gravity, ensuring the accuracy and Repeatability of density testing.
The injection limited bottom surface method is used to directly measure the angle of repose, the funnel taper is 60 ° +/- 0.5 °, and the outflow diaMeter is 5mm, which is suitable for powder flowability analysis of different particle sizes and shapes.
Adopting permanent magnet DC motor and augmented speed line to achieve 0-3000rpm stepless speed regulation, with 40W Power output, smooth operation and 120-minute timing function.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Vibration amplitude 50mm, can test 3 samples at the same time, Test accuracy error is less than +/- 1.5%, stainless steel structure, suitable for battery materials and other powder Tapped Density measurement.
Adopt permanent magnet DC motor, Power 140W, Speed range 0~ 1100rpm, support boosting function and unified speed regulation, and can still work stably in a solution with strong viscosity.
Adopt permanent magnet DC motor to achieve stepless speed regulation, the speed range starts to 1100rpm, the four-station design can be synchronized Stir, enhance corrosion resistance, suitable for high viscosity solution treatment.
Adopting permanent magnet DC motor with augmented speed line to achieve stepless speed regulation of 0-3000rpm, with 160W Power output, smooth operation and no need to replace carbon brushes, medium speed stirring can reduce vibration and prolong life.
