The thickness of INKS film is precisely controlled by the 200-wire tetragonal pyramid-shaped mesh stainless steel anilox roller, which is easy to clean manually and can quickly prepare samples with highly consistent flexographic printing effects.
Using 180 wire metal engraving roller to control the ink film thickness, four pyramidal mesh structure to ensure uniform Spreader, simple operation and easy cleaning, can quickly prepare samples similar to flexographic printing effect.
Adopting ceramic roller synchronous inking technology, the pressure can be adjusted by +/- 2mm, and the material proofing with a thickness of 0.01~ 2mm is supported to achieve accurate repRoduction of solid color and Dot patterns.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Using 300-line quadrilateral pyramid-shaped mesh hole stainless steel anilox roller, the print width is 70mm, the wet film thickness is inversely proportional to the number of lines, and accurate Spreader is realized through handle operation.
Using 180LPI metal anilox roller with 70mm print width, four pyramidal net hole structure to ensure the ink transfer evenly, the handle design in line with ergonomic operation labor-saving.
Equipped with 140lpi, 180lpi, 200lpi anilox roller and metal engraving roller to control ink film thickness, can quickly pRoduce flexographic samples, easy to use and clean, good repRoducibility.
Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
Using 500 wire stainless steel anilox roller and quadrilateral pyramid mesh hole, the thickness of INKS film can be precisely controlled, flexographic samples can be quickly prepared, and cleaning and maintenance are convenient.
Using 220LPI line number stainless steel anilox roller, printing surface width 70mm, mesh shape is quadrilateral pyramid, wet film thickness is inversely proportional to the number of lines, suitable for proofing of different inks.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Using 100-line metal anilox roller, printing surface width 70mm, the mesh is a quadrilateral pyramid structure, liquid Coating can be uniformly Spreader on various substrates to obtain samples with good repRoducibility.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Using metal plating anilox roller, the number of anilox lines reaches 250 lines/inch, which can precisely control the fineness of the film, and the movable handle design is easy to operate. It is suitable for Spreader testing of various liquid materials.
