The guide rail type is easy to operate, the positioning pin ensures accuracy, the pressing device reduces errors, the sampling thickness is less than 1.0mm, the parallelism is less than 0.1mm, and a variety of standard samples can be cut.
The maximum load is 5KN, and the precision structure design is adopted to ensure stable clamping during testing. It is suitable for a variety of material testing requirements, and is easy to operate and durable.
Conductivity Detector measurement principle, measurement range 0-80%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation and backlight display, easy to quickly detect on site.
Using the 4-pin scribing needle specification R0.25/0.5/1.0/1 mm, by moving at a constant speed on the coating, the trajectory change from width to narrower to depth to shallower can be measured.
Double disk independent control supports different processes synchronized, brushless DC motor provides 100~ 1000rpm stepless speed regulation, precision cast iron chassis to ensure equilibrate stability, magnetic disc and Teflon treatment to avoid residue, automatic chill down system to extend equipment life.
Using permanent magnet DC motor to ensure long life without rusting, Heating power 600W with 300mm working disk, support 0~ 2600rpm stepless speed regulation, can stir 10000 ml of solution.
Single chip microcomputer control, double disk two-speed design, Rotation speed 500/1000rpm, equipped with chilled down water pipe and bottom flushing function of grinding disc, anti-corrosion fuselage and leak-proof spindle to ensure the durability of the equipment.
Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
The electromagnet cissing pendulum is used, which can adapt to the thickness test plate of 0.1mm to 5.5mm, and is equipped with two laser Probe to record data. The swing period is 1.4 seconds and 1 second respectively, and the organic Glass door cover reduces the influence of airflow.
Using the electromagnet cissing pendulum, it can measure the thickness of the test plate from 0.1mm to 5.5mm, and is equipped with two laser Probes to record data. The swing period is 0.625s.
Aluminum die-casting ceramic coating plate resistant to chemical corrosion, Temperature range of 350 ℃ accuracy +/- 1 ℃, DC brushless motor running smoothly low noise, double heating circuit to ensure stable temperature, sealing shell anti-corrosion.
Operating temperature range 0-70 ° C, temperature sensor, multi-pin connector support, maximum pressure 0.2 bar.
The steel stylus is used for precision drawing, the diaMeter range is 0-10.5 mm, and it is equipped with multiple sets of weights to achieve accurate loading.
Equipped with 6 strokes and 305mm Travel, it can automatically record four stages of the drying process continuously, and intuitively display the curing state of the paint film through the straight track, and the measurement error is controlled within +/- 4%.
The double disc independent control can realize the simultaneous processing of different materials, and the stepless speed regulation of 100~ 1400rpm can adapt to a variety of grinding and polishing needs. The built-in vacuum device effectively collects dust, and the shell design enhances the operation safety.
