Measurement range 50~ 1400kpa, accuracy ≤ +/- 0.5%, using the method of Miao Lun, support paper, aluminum foil and non-paper sheet material detection, film convex disc pressure 9mm, upper and lower disc concentricity ≤ 0.25mm.
The device uses 1200-1500lx Illumrination degree, achieves 80x magnification and 0.01mm resolution through scale Microscope, and can measure the maximum aperture of 2mm, suitable for aluminum foil pinholing light transmission observation.
High strength aluminum alloy frame, Test Travel adjustable, Test speed 0-30cm/sec adjustable, Test times up to 999999 automatic shutdown, inspection Rod clearance loose and other faults.
Equipped with high light transmitance Glass liner, transmission Illumrination degree 1000Lux, reading Microscope magnification 100X, can accurately measure pinholing size and quantity.
Measurement range 10~ 1600kPa, Precision ≤ +/- 0.3%, equipped with 7-inch Touchscreen real-time display test Linear dispersion and a variety of data, support automatic clamping and calibrating system.
The stamping sampling method is accurate and fast, the limit cutting thickness range is 0.0045~ 0.1mm, and the sampling error is only +/- 0.01mm. The special treatment die blade is used, and it can be used for 2 years without replacement. It is suitable for high-fiber paper, metal foil and other materials.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
It can measure the minimum inner diaMeter of 6mm aluminum tube and 8mm thickness profile, Indication Error 0.5HW, using high strength pointer and special steel pressure needle, support Hardness value multi-standard conversion.
The minimum sample inner diaMeter is 10mm, the maximum sample thickness is 6mm, the crimping needle is made of imported special steel material, which has high Hardness and long life, and the pointer assembly has high strength and is not easy to deform.
Measurement range 0.000~ 0.3mg/L, can be 100 measurements, supporting special instruments to achieve fast and accurate water quality aluminum ion detection, including a variety of Reagent solutions.
Aluminum alloy body and micro hydraulic system, Range 0~ 6.000KN, Continuous Operating Time more than 200 hours, with 5-segment fold line correction and dual Measurement mode to ensure Test accuracy and Stability.
Enclosed aluminum silicate Furnace and nickel-chromium-aluminum alloy heating wire are used to reduce volatile gas corrosion; three-sided heating method combined with PID control, Temperature Fluctuation +/- 5%, accurate and stable temperature control.
The activated aluminum oxide ball is used as the adsorption medium, which can adsorption water vapor and chemical corrosion harmful gases, and the oil blocking rate is more than 99%.
Three-sided heating method with aluminum silicate Furnace, high thermal efficiency and uniform temperature. PID control combined with K-type Thermocouple, temperature control accuracy +/- 5%, support 0~ 9999 minutes timing and phased heating.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
