With ten independent flaw detection channels, the gain range is 120dB, the frequency band is 0.4~ 20.0MHz, and it supports automatic generation of DAC Linear dispersion and 500 data storage for efficient defect identification.
With 130dB high gain and Automatic calibration function, support 100 independent flaw detection channels and 1000 waveform storage, Scanning range 0-10000mm, to meet the needs of a variety of material flaw detection.
Using vanadium oxidation uncooled infrared focal plane Detector, temperature resolution of 0.1 ℃, with 56 ° × 42.2 ° field of view and focus-free design, support center point temperature measurement and cold hot spot automatic tracking function.
With 16 flaw detection channels and 0.5~ 20MHz Frequency range, it supports Automatic calibration probes and generates DAC Linear dispersion. High Sampling rate and low noise design meet a variety of operating conditions inspection needs.
Adopting a non-light infrared NDIR Sensor, with a range of 0~ 1000ppm, Response Time ≤ 15 seconds, supports a variety of signal output and remote transmission, and has overvoltage protection and automatic recovery functions.
Adopt non-light infrared NDIR Sensor, Response Time ≤ 15s, detection accuracy ≤ +/- 2%, support PPM,% VOL, mg/m ³ Unit switch, with overvoltage protection and automatic recovery function.
Adopt non-light infrared NDIR Sensor, Response Time ≤ 15s, accuracy ≤ +/- 2%, support a variety of signal output and remote transmission, with overvoltage, lightning protection and other protection functions to ensure stable and reliable monitoring.
With 100 flaw detection channels and 300 graphics storage capacity, support three probe modes and automatically generate DAC Linear dispersion, waterproof and dustproof design to adapt to harsh environments, Operating temperature range -27~ 70 ℃.
With DAC Linear dispersion automatic generation function, transmission Frequency up to 1000Hz, support 6 Meters detection range and 10 independent flaw detection channels, real-time dynamic video recording and automatic measurement crazing depth.
Using infrared detection principle, range 0~ 1000ppm, resolution 1ppm, Response Time T90 ≤ 20s, built-in 3800mAh battery, support Data storage and Humidity detection, simple operation.
With a wide frequency range of 64Hz-2MHz, it can detect longitudinal crazing and transverse defects, adapts to a variety of Probe types, supports automatic phase analysis and zero correction functions, and is suitable for high-speed inspection environments.
Scanning range 0-10000mm, working time 8 hours, waterproof and dustproof function, support 100 flaw detection channels and three probe modes, can automatically generate DAC Linear dispersion and store 300 inspection data.
Scanning range 0-6000mm, 100 independent flaw detection channels, support Automatic calibration and defect echo positioning, with high-brightness color display and three-proof design, adapt to various complex working environments.
Pump suction sampling and infrared Sensor technology, range 0~ 2000ppm, resolution 1ppm, Response Time ≤ 20s, with IP65 Protection Rating and Dust Filter, adapt to harsh environment.
Using infrared NDIR detection principle, range 0-5000ppm, Response Time ≤ 30 seconds, with explosion-proof structure and a variety of signal output, support remote monitoring and customization functions.
