Three independent studios can simultaneously carry out experiments under different conditions, each floor is independently controlled and vacuumed, Vacuum Level up to 133Pa, rectangular vacuum Chamber to improve space utilization, equipped with double-decked tempered Glass doors for easy observation.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
The mirror stainless steel liner is easy to clean, the three-speed speed regulating fan avoids sample volatilization, the temperature fluctuation +/- 0.5 ℃ temperature control is accurate, the environmentally friendly refrigerant operates with low energy consumption, and supports temperature limit alarm to ensure safety.
With a capacity of 2.5 liters, it adopts a single-layer structure design and is suitable for a variety of Power Dispersers to ensure efficient and stable material handling and easy operation.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
Integrated Incubator and Shaker functions, Oscillation Frequency 40~ 300rpm, Temperature range RT + 5~ 65 ℃, 304 stainless steel liner and microcomputer PID control, with UV sterilization and automatic storage setting paraMeters.
Integrated Incubator and Shaker functions, small footprint and large bottle load; Temperature range 4~ 65 ℃, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner for easy cleaning, quiet operation and support multi-stage programming.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Using ruby probe and digital Probe technology, Measurement range 0-5000μm, Response speed 0.3s, can intelligently identify iron powder putty layer, and support three-color backlight and custom alarm value prompt.
Equipped with three high voltage gas driven atomization nozzles and anti-drip baffles, support inert gas protection lame plating at 5000Pa basic Vacuum Level, with 0.006-41mL/min precision peristaltic pump and 180mm Travel moving mechanism, to achieve uniform multi-layer film Preparative.
The mirror stainless steel liner is easy to clean, Temperature range 0~ 60 ℃ and fluctuation +/- 0.5 ℃, three wind speed adjustment to avoid sample volatilization, with independent temperature limit alarm system to ensure safe operation of the experiment.
The device can precisely control the thickness of the ink layer, the minimum Basis Weight unit is 0.0012CC, and the compact size is φ 20 * 180mm, which is convenient for inks comparison and color concentration detection.
