Adopt double disc co-directional sticky Refining mode, flying knife Rotation speed 1400r/m, disc clearance 0-25mm adjustable, equipped with 3.2-inch LCD display real-time display Refining Power and power consumption paraMeters to meet the needs of different concentration Pulp experiments.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Using the mechanical action of throwing knife roller and bottom knife, it can handle 200-700g dead stock, pulp Tank volume 45 liters, Rotation speed 500 +/- 10rpm, and realize fine processing such as fiber cutting, crushing, rubbing and splitting.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
It can measure the range of 0-1000CSF, with an accuracy of 10CSF, using 304 stainless steel material and silicone sealing ring structure, with self-Adjustment, suitable for various Pulp water filtration change detection.
Measurement range 1~ 100 ° SR, sealing cone rising speed 100 +/- 10mm/s, Pulp suspension filtration rate was determined according to Schopper-Riegler method.
Rotation speed of 600r/m slurry pool and 6.0 +/- 0.2m/s line speed difference design, support 0-25mm buckling gap adjustment and three Refining pressure modes, meet the needs of 5-30g absolute dry slurry treatment, ensure experimental accuracy and Repeatability.
Rotation speed of 200-900rpm is adjustable with a slurry Tank volume of 47 liters, and a plate inner concave diversion groove and noise silencing device are equipped to improve the experimental accuracy and operating environment.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 500mm, it is suitable for medium and low viscosity mixing. Medium and high speed operation provides efficient mixing effect.
Adopting 1000-5000rpm variable frequency speed regulation technology, equipped with 370W motor and 3L capacity container, it can achieve efficient dissociation without destroying the fiber structure, meeting the processing requirements of different Pulp samples.
Made of 304 stainless steel, Measurement range 0-1000CSF, equipped with 0.50mm diaMeter screen mesh, self-calibrating, long service life.
90 degree right angle Probe design for low headroom area operation, Measurement range 0-1500 μm, accuracy of +/- 1%, using stainless steel sealing structure to achieve complete waterproof function.
60 degree projection angle design, Measurement range 0~ 200GU, Repeatability 0.2GU, Support Automatic calibration and a variety of Measurement mode, built-in large-capacity lithium battery can work continuously for more than 12 hours.
