With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Roller type design, range 0~ 500μm, stainless steel material to ensure durability, suitable for on-site rapid measurement wet film thickness, in line with a number of execution standards.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
Using split design, equipped with F and N Probe, Measurement range 0~ 1250μm, error +/- 3%, support automatic identification of matrix material and RS-232C interface communication, stable and reliable operation.
Split structure can be freely replaced Probe, Measurement range 0-1500 μm, accuracy +/- 1%, IP65 Protection Rating, support 1000 reading storage, suitable for a variety of ferrous metal substrate environment.
Using split Probe design, Measurement range 1.2~ 200mm, resolution up to 0.01mm, Coupling status prompt and automatic shutdown function, adapt to different Frequency Probe, can measure rough surface and paint surface.
The split structure is equipped with a dedicated thick coating Probe, Measurement range of 0~ 13000 μm, accuracy +/- 3%, IP65 Protection Rating and high-speed measurement capability of more than 60 readings per minute.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
With paint penetration measurement ability, accurate measurement of wall thickness without removing coatings, thickness range 2.5~ 125mm, accuracy +/- 0.03mm, support multi-echo and single-echo mode switching, suitable for detection needs of different surface conditions.
Split Probe interchangeable, high wear resistant carbide Probe service life of more than 500,000 times. Measurement accuracy of +/- (2% + 1μm), can accurately measure platings within 10 microns, and has a variety of calibrating and statistical functions.
Split design is equipped with LCD display, Measurement range 1~ 250mm, Speed of sound 5920m/s, Coupling status prompt and Zero Adjustment, Support upper and lower tolerance setting and automatic alarm.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Using split Probe design, Probe can be plugged and interchanged, Measurement accuracy of +/- 2% H + 1 μm, high wear-resistant carbide Probe service life of more than 500,000 times, support a variety of Calibration methods and data statistics.
Frequency 5.0MHz, support paint layer detection and emission to echo mode, Measurement range 2~ 160mm, suitable for a variety of workpiece thickness measurement.
