With heating and cooling functions, Temperature range -10~ 100 ℃, Temperature Fluctuation +/- 0.05~ 0.1 ℃, support 10-stage program control and external communication, pump Flow rate 12L/min, suitable for internal and external circulation applications.
With heating and cooling functions, Temperature range -20~ 100 ℃, Fluctuation +/- 0.05~ 0.1 ℃, can be 10-stage program control, to achieve timing thermostatic, heating and cooling.
Temperature range -20~ 20 ℃, cooling capacity up to 1800W, cooling time is reduced by 35% compared with traditional equipment, open Bath can be applied to acid solution and organic solution thermostatic experiment.
Temperature range -20~ 100 ℃, Temperature Fluctuation +/- 0.05~ 0.1 ℃, using proportional refrigeration technology and PID control, support internal and external circulation and programmed operation, with low liquid level and over temperature protection, suitable for a variety of application environments.
Using environmental refrigerant R134a, the cooling time is reduced by more than 40%, Temperature range -40~ 65 ℃, Temperature Fluctuation +/- 0.5 ℃, support multi-stage programming and independent temperature limit alarm, easy to operate and clean.
Temperature control accuracy of +/- 2 ℃, cooling capacity up to 3240W, equipped with fully enclosed Air-Cooled Compressor and anti-corrosion circulation system, rapid temperature rise and fall, support large capacity Bath and external circulation function.
Provide a uniform and constant field source with controlled temperature, which can be used for constant temperature experiments or tests on samples, and can also be used as a heat source for direct or auxiliary heating.
Temperature range -20 ℃ to 150 ℃, temperature control accuracy +/- 0.05~ 0.1K, equipped with pressure/suction pump and Pt100 Sensor, support multi-stage program control and external temperature sensor.
Temperature range -20 ℃ to 150 ℃, equipped with pressure/suction pump and Pt100 Sensor, supports multi-stage program control and external temperature sensor, with hardware over-temperature protection and multiple safety modes.
Temperature range -20 ℃ to 100 ℃, Temperature Fluctuation +/- 0.05~ 0.1K, equipped with pressure/suction pump and hardware over-temperature protection, supports multi-stage program control and external Sensor interface.
Using 365nm wavelength UVLED light source, optical power density 0.5W/cm ², with intelligent safety protection function, support automatic and manual control mode, suitable for thermal materials and energy saving and environmental protection.
Temperature range -20 ℃ to 150 ℃, Temperature Fluctuation +/- 0.05~ 0.1K, using pressure/suction pump and Pt100 Sensor, support multi-stage program control and external Communication interface.
It adopts transparent carbonic acid ester Bath design, with a volume of 6L, equipped with pressure/suction pump and Pt100 temperature sensor, with low liquid level protection and hardware over-temperature protection functions, and supports external circulation temperature control.
Temperature range -10~ 100 ℃, Temperature Stability +/- 0.02 ℃, using imported Compressor and SUS304 stainless steel heating device, support internal and external circulation, can accommodate 500ml beaker directly inserted into use.
Two-stage Compressor refrigeration combined with maintenance-free pressure suction pump, maximum Flow rate 22L/min, pressure 1bar, resistant to fiber and metal particles, adapt to external load automatic adjustment, effectively protect external equipment.
