Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
Sampling diaMeter 112.8mm, Film thickness range 0.1-1 mm, can accurately cut 100cm ² standard samples, suitable for paper physical performance testing requirements.
High sampling accuracy, parallelism of the two long sides ≤ 0.015mm, support 0.05~ 1.2mm thickness materials, can detect the Compressive Strength performance of paper, film, Spinning & weaving materials and other samples.
Sampling size 25.4mm * 140mm, thickness range 0.05~ 1.2mm, parallelism of two long sides ≤ 0.015mm, to ensure High Accuracy sampling, Improve Test Reliability.
The stamping sampling method is accurate and convenient, the quenching tool is resistant to abrasion, the sampling error is +/- 0.2mm, the sampling thickness range is 0.1-1 mm, and the special treatment blade can be used normally for 10 years.
High sampling accuracy, parallelism ≤ 0.015mm, thickness range of 0.1~ 1.2mm, suitable for a variety of paper strength tests to ensure accurate and reliable detection data.
Sampling area 100cm ², error +/- 0.35cm ², stamping sampling method, suitable for 0.1~ 1.0mm thickness materials, to ensure accurate sample standards.
Sampling accuracy of +/- 0.2mm, can handle 0.1-1 film thickness samples, equipped with upper and lower knife design to ensure that the incision is neat and not fluffy, and supports multi-layer punching operation.
Special No. 10 steel high temperature quenching knife edge, smooth cutting without burrs; one-piece casting structure is sturdy and durable; sampling area 100cm ², error +/- 0.35cm ², suitable for 0.1~ 1.2mm Film thickness material.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
The special No. 10 steel knife edge is used to ensure durability, the punching sample is smooth without burrs, the integrated casting structure is sturdy and not deformed, the sampling area is 100cm2, and the sampling Film thickness range is 0.01-1 mm.
The sampling area is 100cm ², the sampling error is +/- 0.35cm ², the sampling thickness range is 0.1-3 mm, and the special treatment die blade is durable and free of replacement.
Precision combination of cutting edge to ensure that the sample edge flat, especially for ring pressure test design, can cut standard samples, easy to operate, cutting effect is good.
