Range 20~ 2000000 mPa · s, repRoducibility +/- 0.5% F. S, support 0.3~ 60rpm multi-speed switching, equipped with Thermostat to achieve temperature stability +/- 0.05~ 0.1K, can display viscosity, speed and torque paraMeters simultaneously.
Temperature control accuracy +/- 0.2 ℃, Temperature Uniformity ≤ +/- 0.3 ℃, DC brushless motor drive maintenance-free, with power-off automatic recovery and 0-100 hours timing function, support a variety of module replacement.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Temperature range + 5~ 95 ℃, pump flow 15L, providing High Accuracy and uniform temperature constant field source, suitable for a variety of laboratory environments.
Driven by DC motor, the clamping disc rises and falls rapidly, supports 0-2 hours oscillation time adjustment; with automatic pressure adjustment function to avoid container damage, with 680-710 times/minute Frequency to achieve up and down before and after multi-shake mixing, the main motor Power 750W.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Temperature range RT + 5~ 150 ℃, high temperature uniformity, providing 15L large flow cycle, Tank size is 300 * 235 * 200mm, suitable for a variety of experimental needs.
Temperature range + 5 to 200 ° C, pump flow up to 15L, provides High Accuracy, uniform temperature and controlled constant field source for a variety of experimental environments.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
Maximum load 0.5KN, compact structure, reliable clamping, suitable for a variety of small sample testing, easy to operate.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
Support 10-20mL small sample testing, viscosity range 80-40000000mPa · s, equipped with a dedicated rotor for High Accuracy measurement, Thermostatic Bath connection can control the sample temperature.
Temperature range -5~ 95 ℃, using Air-Cooled fully enclosed Compressor and overall foaming process, high cooling efficiency, low noise and good thermal insulation performance.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
