Measure the surface of paint film and putty film and the actual drying time, in line with GB/T1728 standard, the weight of the Tester is 200g, and the weight of the bottom area is 1cm ².
Using injection defined bottom surface method for measurement, the funnel outlet has a diaMeter of Φ 5mm and a taper of 60 ° +/- 0.5 °, which can accurately measure the acute angle between the inclined surface of dust accumulation and the horizontal one.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for large bottles such as wine bottles and infusion bottles.
Carr Angle of Repose was determined by injection limited bottom surface method, funnel taper 60 ° +/- 0.5 °, outlet diaMeter 5mm can be customized 10mm, easy to operate, durable, can accurately reflect the powder flowability.
DC brushless motor, Speed range 30-1600rpm, Max. Torque 100N.cm, with automatic overload protection and torque automatic adjustment function, support long-term safe operation, suitable for a variety of viscosity samples.
Wall-Mounted waterproof structure is equipped with PTFE anti-clogging dialysis membrane, supports 0.0-14 pH Measurement range and +/- 0.2pH accuracy, alarm point can be set at 3-11pH, LED light reminder when the setting exceeds +/- 0.5pH, extending ElectRode life.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Using stainless steel material, bottom area 1cm ², weight 200g, in line with GB/T 1728 standard, can accurately determine the film and putty film surface drying time.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
The bottom hole and tip design are adopted, and the outflow time is determined by observing the appearance of the tip, which realizes rapid viscosity measurement and is suitable for on-site testing needs.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
The bottom of the cogging adopts K shape design, the tooth spacing is large, suitable for high viscosity Coating, wet film thickness 150 μ m, excellent leveling, suitable for glue and other viscous materials Spreader.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for small volume bottles such as ampoules and vials, general structure design is simple and durable.
Measurement range of +/- 1000mV, equipped with large LCD display with background light, support manual two-point calibrating and automatic diagnostic function, can verify calibrated status and ElectRode status, fail safe alarm system to improve operational Reliability.
K-shaped cogging bottom design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 80 μ m, leveling, suitable for large glue viscosity application scenarios.
