Overview
RUNJIE RJ-V2 miniature drawing instrument is suitable for detecting the pull-out force of various anchors, steel bars (planting bars), expansion bolts, chemical anchors and other anchors, and can also be used for on-site pull-out force detection of Glass curtain walls. It is a testing instrument required by various Quality control and construction units. The instrument is composed of a manual pump, a hollow hydraulic cylinder, a digital pressure gauge, a high voltage hose with a quick connector, an anchor, a tie rod, a adapter and a portable case. The whole series of hydraulic cylinders are hollow self-resetting, digital integrated design, can directly read the force value (KN), and have peak holding, storage, clearing, backlight, query and automatic shutdown functions. The technology is advanced and the operation is simple, especially suitable for laboratory and field use.
Features
1. Chinese settings menu
2. Digital display direct reading force value
3. Peak hold
4. Surface corrosion electrostatic spray
5.5 segment polyline correction
6. Data storage
7. High Accuracy Sensor
8. Resistant high voltage sealing ring
9. Automatic shutdown
10. Self-returning spring
11. Ultra-low power consumption, continuous operation for more than 200 hours
12. Stainless steel body
13. Nickel Plated Pistons and Slides
Principle
The miniature drawing instrument provides hydraulic power through the manual pump, drives the hollow hydraulic cylinder to generate tension, and acts on the anchor to detect the pull-out force. The digital pressure gauge displays the force value in real time, and has functions such as peak holding and storage to ensure accurate and reliable data.
Applications
Pullout testing of anchors, steel bars (planting bars), expansion bolts, chemical anchors and other anchors, and on-site pullout testing of Glass curtain walls
Standards
GB50203-2011 "Masonry structure engineering construction mass acceptance code", JGJ145-2013 "concrete structure after anchoring technical regulations"
Steps
1. Connect the manual pump, hydraulic cylinder and digital pressure gauge
2. Install anchors, tie rods and adapters
Step 3 Start the hand pump to apply tension
4. Observe the reading force value of the digital pressure gauge
5. Record results with Peak Hold and Data storage
6. After completing the test, it will be cleared and automatically shut down.
Notice
• Ensure that all connecting parts are fastened and reliable
• Check whether the hydraulic system is normal before operation
• Avoid overloading and prevent damage to the instrument
• Regular maintenance and calibrating for accuracy
• Clean and store in the portable case immediately after use
